76885-TOA-S01 Front Right Headlight Washer Nozzle for HONDA CR-V 2012

76885-TOA-S01 Front Right Headlight Washer Nozzle Product Overview

The component shown under 76885-TOA-S01 is a front right headlight washer nozzle intended for HONDA CR-V 2012. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for CR-V

Compatibility for 76885-TOA-S01 should be confirmed against HONDA CR-V 2012 and the right installation side. The review should compare the hose connection or cover hinge with the original part, review painted, primed and unpainted finish requirements, and check whether the original cover is supplied separately from its support. Use the removed part and product photographs to compare the complete OE marking with the removed washer component, confirm the destination-market equipment specification, and verify that the OE reference is not for the opposite side; finally, confirm that the listed model designation matches the vehicle and use the full OE number, not a partial family reference.

Headlight Washer Nozzle Function and Design Notes

The visible and hidden interfaces of HD02010-024 should be checked separately. For this headlight washer nozzle, compare the cap-to-support engagement method, inspect the washer outlet for blockage, and check the complete supplied scope against the photographs. A direct comparison with the removed part should additionally review the spring-loaded return features where fitted, compare the support flange width, and inspect the molded tabs for cracks or distortion. Before the item is accepted, check the fluid inlet for storage contamination and review the engagement of the cover with the nozzle stem.

OE Identification and Side Confirmation

76885-TOA-S01 is the primary OE identity for this right front right headlight washer nozzle, while HD02010-024 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for HD02010-024 begins before the bumper area is disturbed: test the spray direction before returning the vehicle and test for drips after the washer pump stops. During trial fitting, test the spray direction before returning the vehicle, test for drips after the washer pump stops, and test the spray direction before returning the vehicle. Before returning the vehicle to service, test for drips after the washer pump stops, test the spray direction before returning the vehicle, and test for drips after the washer pump stops.

Receiving Inspection

When HD02010-024 arrives, receiving staff should document any shortage before the receiving inspection is closed, compare the supplied side with the vehicle repair order, and inspect the visible cover face for scratches or pressure marks. Before workshop release, review the hose spigot for impact damage or distortion, check the spring-return area where the component includes an actuator, record carton damage before the item is moved to workshop stock, and compare connector depth and hose angle with the retained original part. Complete the inspection by ensuring that staff photograph the received item if the vehicle fitment is still pending, check the cap hinge or retaining point for free movement, and check the actuator body for straightness before trial installation.

Product Technical Specifications

Product type: Front Right Headlight Washer Nozzle

Primary OE reference: 76885-TOA-S01

Cross-reference numbers: 76885-TOA-S01 76885TOAS01

Internal item code: HD02010-024

Vehicle brand: HONDA

Vehicle model: CR-V

Model year: 2012

Installation position: Front bumper / headlamp washer area

Side / orientation: Right

Applicable vehicle: HONDA CR-V 2012

Wholesale Supply and Protective Packing

For a quotation or repeat order of 76885-TOA-S01, please confirm the preferred incoterm, plug open fluid connections during packing, and confirm the acceptable delivery window. Packing instructions should provide the consignee and freight-forwarder details, protect hose spigots and projecting tabs, and identify painted and unpainted variants on separate lines. Before dispatch, request moisture protection for sea freight and confirm sample requirements before a bulk order.

Frequently Asked Questions

How should 76885-TOA-S01 be checked before installation?

Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For item HD02010-024, the approval should check whether the original cover is supplied separately from its support. The same item record should also verify nearby parking-sensor or trim interfaces.

Is workshop installation recommended for 76885-TOA-S01?

Yes. A qualified workshop can access the bumper area on the CR-V, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed HONDA CR-V 2012, technicians should verify that the cover closes without rubbing the bumper. A workshop comparison should additionally inspect nearby wiring and sensors before refitting trim.

Is a sample order available for 76885-TOA-S01?

Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For the right-side order line, confirm the acceptable delivery window. The order review should further use dividers to prevent caps from rubbing each other.

Why must left and right versions of 76885-TOA-S01 be distinguished?

Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 76885-TOA-S01 should review the spring-loaded return features where fitted. Receiving staff should also review any paint-preparation requirement before fitting.

Are clips, hoses or fasteners supplied with 76885-TOA-S01?

The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. Before this headlight washer nozzle is accepted, include the full OE reference on the purchase order. Before approval, the buyer or technician should confirm the acceptable delivery window.

Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.

Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.

Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.

System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.

Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.