76881-TP6-Y01 Front Right Headlight Washer Nozzle Cover for HONDA Crosstour 2011

76881-TP6-Y01 Front Right Headlight Washer Nozzle Cover Product Overview

The component shown under 76881-TP6-Y01 is a front right headlight washer nozzle cover intended for HONDA Crosstour 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for Crosstour

Compatibility for 76881-TP6-Y01 should be confirmed against HONDA Crosstour 2011 and the right installation side. The review should confirm that the vehicle is equipped with a factory headlight washer system, review body-style differences within the same model generation, and check regional variations in headlamp-cleaning equipment. Use the removed part and product photographs to check the production date where model-year transitions overlap, verify the required left or right installation side, and confirm the front bumper option before ordering; finally, verify nearby parking-sensor or trim interfaces and confirm whether a cap, nozzle, bracket or complete assembly is required.

Headlight Washer Nozzle Cover Function and Design Notes

The visible and hidden interfaces of HD02010-012 should be checked separately. For this headlight washer nozzle cover, check the nozzle outlet orientation, review the spring-loaded return features where fitted, and compare the depth of the actuator body. A direct comparison with the removed part should additionally inspect the rear reinforcement ribs, check the bumper-facing surface for transport marks, and review the engagement of the cover with the nozzle stem. Before the item is accepted, compare the cap perimeter and corner radii and inspect the hose connector for ovality.

OE Identification and Side Confirmation

76881-TP6-Y01 is the primary OE identity for this right front right headlight washer nozzle cover, while HD02010-012 is the internal item code. Match both references to the vehicle record, then compare the hose connection or cover hinge with the original part. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for HD02010-012 begins before the bumper area is disturbed: support the bumper cover while accessing the hidden actuator and paint or finish visible covers before final installation when required. During trial fitting, check the headlamp lens receives an even spray, work with the washer system depressurized, and confirm that the nozzle extends and retracts freely. Before returning the vehicle to service, verify that the cap remains attached through a full washer cycle, check that the washer unit is fully seated in its guide, and photograph the original routing before disassembly.

Receiving Inspection

When HD02010-012 arrives, receiving staff should protect the visible face again after inspection is complete, photograph the received item if the vehicle fitment is still pending, and protect the visible face again after inspection is complete. Before workshop release, photograph the received item if the vehicle fitment is still pending, protect the visible face again after inspection is complete, photograph the received item if the vehicle fitment is still pending, and protect the visible face again after inspection is complete. Complete the inspection by ensuring that staff photograph the received item if the vehicle fitment is still pending, protect the visible face again after inspection is complete, and photograph the received item if the vehicle fitment is still pending.

Product Technical Specifications

Product type: Front Right Headlight Washer Nozzle Cover

Primary OE reference: 76881-TP6-Y01

Cross-reference numbers: 76881-TP6-Y01 76881TP6Y01

Internal item code: HD02010-012

Vehicle brand: HONDA

Vehicle model: Crosstour

Model year: 2011

Installation position: Front bumper / headlamp washer area

Side / orientation: Right

Applicable vehicle: HONDA Crosstour 2011

Wholesale Supply and Protective Packing

For a quotation or repeat order of 76881-TP6-Y01, please state the requested delivery schedule, state the required order quantity, and list model years and bumper versions for mixed orders. Packing instructions should confirm pallet requirements for larger quantities, protect each nozzle outlet from dust during transit, and confirm sample requirements before a bulk order. Before dispatch, request moisture protection for sea freight and identify painted and unpainted variants on separate lines.

Frequently Asked Questions

Are clips, hoses or fasteners supplied with 76881-TP6-Y01?

The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For item HD02010-012, the approval should separate left and right items on the packing list. The same item record should also protect hose spigots and projecting tabs.

Can 76881-TP6-Y01 fit every Crosstour model year?

No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed HONDA Crosstour 2011, technicians should separate mirrored left and right items during inventory selection. A workshop comparison should additionally check regional variations in headlamp-cleaning equipment.

How should 76881-TP6-Y01 be packed for export?

The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the right-side order line, identify project stock and service stock separately. The order review should further use dividers to prevent caps from rubbing each other.

Is a sample order available for 76881-TP6-Y01?

Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. The product-specific check for 76881-TP6-Y01 should confirm the acceptable delivery window. Receiving staff should also state the target vehicle application.

Is workshop installation recommended for 76881-TP6-Y01?

Yes. A qualified workshop can access the bumper area on the Crosstour, transfer hoses or clips safely and test the washer system for correct operation and leaks. Before this headlight washer nozzle cover is accepted, align the cover flush with the bumper surface. Before approval, the buyer or technician should support the bumper cover while accessing the hidden actuator.

Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.

Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.

Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.

Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.

Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.