76880-TA1-M02 Front Right Headlight Washer Nozzle for HONDA Accord 2011

76880-TA1-M02 Front Right Headlight Washer Nozzle Product Overview

The component shown under 76880-TA1-M02 is a front right headlight washer nozzle intended for HONDA Accord 2011. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for Accord

Compatibility for 76880-TA1-M02 should be confirmed against HONDA Accord 2011 and the right installation side. The review should compare the washer opening beside the correct headlamp, inspect the bumper cutout shape and surrounding contour, and review body-style differences within the same model generation. Use the removed part and product photographs to verify the required left or right installation side, confirm whether a cap, nozzle, bracket or complete assembly is required, and confirm that the listed model designation matches the vehicle; finally, compare the complete OE marking with the removed washer component and compare the hose connection or cover hinge with the original part.

Headlight Washer Nozzle Function and Design Notes

The visible and hidden interfaces of HD02010-006 should be checked separately. For this headlight washer nozzle, review the spring-loaded return features where fitted, check each molded locator against the original component, and inspect the telescopic body for smooth movement. A direct comparison with the removed part should additionally compare the distance between mounting points, review any paint-preparation requirement before fitting, and check the fluid inlet for storage contamination. Before the item is accepted, inspect the actuator barrel for impact damage and compare the outer surface profile with the bumper opening.

OE Identification and Side Confirmation

76880-TA1-M02 is the primary OE identity for this right front right headlight washer nozzle, while HD02010-006 is the internal item code. Match both references to the vehicle record, then verify nearby parking-sensor or trim interfaces. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for HD02010-006 begins before the bumper area is disturbed: verify that the cap remains attached through a full washer cycle and reconfirm the OE number before discarding the packaging. During trial fitting, confirm sufficient clearance behind the bumper, transfer reusable clips only after checking their condition, and compare the installed height with the opposite side. Before returning the vehicle to service, confirm that the nozzle extends and retracts freely, test for drips after the washer pump stops, and clean the hose and connector before assembly.

Receiving Inspection

When HD02010-006 arrives, receiving staff should match the item label to the purchase order and OE reference, compare left and right orientation before removing protective wrapping, and record carton damage before the item is moved to workshop stock. Before workshop release, confirm the bumper-facing edge has not been compressed in transit, verify that protective plugs remain in open fluid connections, review the production finish against the approved sample, and verify the nozzle head returns smoothly without applying excess force. Complete the inspection by ensuring that staff inspect the visible cover face for scratches or pressure marks, verify the cover contour against the approved product photograph, and check painted or primed surfaces under neutral lighting.

Product Technical Specifications

Product type: Front Right Headlight Washer Nozzle

Primary OE reference: 76880-TA1-M02

Cross-reference numbers: 76880-TA1-M02 76880TA1M02

Internal item code: HD02010-006

Vehicle brand: HONDA

Vehicle model: Accord

Model year: 2011

Installation position: Front bumper / headlamp washer area

Side / orientation: Right

Applicable vehicle: HONDA Accord 2011

Wholesale Supply and Protective Packing

For a quotation or repeat order of 76880-TA1-M02, please separate fragile actuator bodies from heavier metal parts, use dividers to prevent caps from rubbing each other, and request a packing-list breakdown by internal item code. Packing instructions should confirm sample approval before mass shipment, state any outer-carton marking requirements, and verify the packed quantity by OE reference. Before dispatch, request replacement-part documentation when required and confirm the acceptable delivery window.

Frequently Asked Questions

How should 76880-TA1-M02 be packed for export?

The front right headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For item HD02010-006, the approval should confirm sample approval before mass shipment. The same item record should also confirm the acceptable delivery window.

Is 76880-TA1-M02 a complete headlight washer system?

No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. On the listed HONDA Accord 2011, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally use dividers to prevent caps from rubbing each other.

Is workshop installation recommended for 76880-TA1-M02?

Yes. A qualified workshop can access the bumper area on the Accord, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the right-side order line, tighten bracket hardware only after alignment. The order review should further verify that the cover closes without rubbing the bumper.

Can product photographs alone confirm 76880-TA1-M02 compatibility?

Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 76880-TA1-M02 should compare every tab, clip seat and locating shoulder. Receiving staff should also use the full OE number, not a partial family reference.

What information should accompany a 76880-TA1-M02 enquiry?

Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle is accepted, list model years and bumper versions for mixed orders. Before approval, the buyer or technician should confirm sample approval before mass shipment.

Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.

Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.

Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.

System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.

Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.