76880-T0A-S01 Front Left Headlight Washer Nozzle for HONDA CR-V 2012

76880-T0A-S01 Front Left Headlight Washer Nozzle Product Overview

The component shown under 76880-T0A-S01 is a front left headlight washer nozzle intended for HONDA CR-V 2012. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for CR-V

Compatibility for 76880-T0A-S01 should be confirmed against HONDA CR-V 2012 and the left installation side. The review should match the exact model year and bumper revision, confirm the destination-market equipment specification, and confirm whether a cap, nozzle, bracket or complete assembly is required. Use the removed part and product photographs to check regional variations in headlamp-cleaning equipment, compare every tab, clip seat and locating shoulder, and check the washer jet position relative to the headlamp lens; finally, match the exact model year and bumper revision and confirm the destination-market equipment specification.

Headlight Washer Nozzle Function and Design Notes

The visible and hidden interfaces of HD02010-023 should be checked separately. For this headlight washer nozzle, review the hose spigot angle on the washer nozzle, check the fluid inlet for storage contamination, and inspect the washer outlet for blockage. A direct comparison with the removed part should additionally compare the retracted position with the bumper surface, review the clip geometry on the rear face, and check whether the visible part requires painting. Before the item is accepted, inspect the actuator barrel for impact damage and compare the visible bumper-side contour.

OE Identification and Side Confirmation

76880-T0A-S01 is the primary OE identity for this left front left headlight washer nozzle, while HD02010-023 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for HD02010-023 begins before the bumper area is disturbed: disconnect the fluid hose without twisting the plastic spigot and tighten bracket hardware only after alignment. During trial fitting, photograph the original routing before disassembly, confirm that the nozzle extends and retracts freely, and paint or finish visible covers before final installation when required. Before returning the vehicle to service, reconfirm the OE number before discarding the packaging, replace distorted clips or damaged seals, and verify that the cover closes without rubbing the bumper.

Receiving Inspection

When HD02010-023 arrives, receiving staff should check the actuator body for straightness before trial installation, confirm that small seals or clips have not remained in the wrapping, and inspect projecting pins before placing the item on a hard bench. Before workshop release, review the production finish against the approved sample, measure the main mounting span when two bumper versions appear similar, confirm the internal item code before mixed stock is shelved, and check the carton partition for evidence of part-to-part contact. Complete the inspection by ensuring that staff document any shortage before the receiving inspection is closed, verify the nozzle head returns smoothly without applying excess force, and inspect the fluid passage only with clean, non-damaging tools.

Product Technical Specifications

Product type: Front Left Headlight Washer Nozzle

Primary OE reference: 76880-T0A-S01

Cross-reference numbers: 76880-T0A-S01 76880T0AS01

Internal item code: HD02010-023

Vehicle brand: HONDA

Vehicle model: CR-V

Model year: 2012

Installation position: Front bumper / headlamp washer area

Side / orientation: Left

Applicable vehicle: HONDA CR-V 2012

Wholesale Supply and Protective Packing

For a quotation or repeat order of 76880-T0A-S01, please request export-carton dimensions before freight booking, confirm the acceptable delivery window, and request barcode or private-label details when needed. Packing instructions should provide the complete destination address or port, provide the consignee and freight-forwarder details, and confirm whether the visible cover needs a primed or finished surface. Before dispatch, separate fragile actuator bodies from heavier metal parts and protect hose spigots and projecting tabs.

Frequently Asked Questions

Can product photographs alone confirm 76880-T0A-S01 compatibility?

Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item HD02010-023, the approval should compare the actuator orientation behind the bumper cover. The same item record should also verify nearby parking-sensor or trim interfaces.

What should be inspected when 76880-T0A-S01 arrives?

Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. On the listed HONDA CR-V 2012, technicians should review the production finish against the approved sample. A workshop comparison should additionally document any shortage before the receiving inspection is closed.

How should 76880-T0A-S01 be checked before installation?

Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the left-side order line, compare the actuator orientation behind the bumper cover. The order review should further check whether the original cover is supplied separately from its support.

What information should accompany a 76880-T0A-S01 enquiry?

Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. The product-specific check for 76880-T0A-S01 should include the full OE reference on the purchase order. Receiving staff should also verify the packed quantity by OE reference.

Does the finish specification matter for 76880-T0A-S01?

Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle is accepted, check the fluid inlet for storage contamination. Before approval, the buyer or technician should check the bumper-facing surface for transport marks.

Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.

Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.

Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.

System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.

Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.