75312-T0A-A01 Front Right Door Lower Molding for 2012-2016 Honda CR-V

Front Passenger Door Trim

OE number 75312-T0A-A01 covers the lower molding fitted to the right front door of the 2012-2016 Honda CR-V. The elongated strip differs from the rear-door garnish in both length and terminal geometry.

Straightness and Visual Continuity

A straight, undamaged profile is important because this molding establishes the side-body baseline. Compare the taper, thickness and end cuts with the adjacent trim so the exterior line remains continuous after repair.

Application Identification

Confirm the vehicle generation and front passenger position before purchase. Similar Honda moldings can share colour and texture while using different attachment intervals, making the OE number the primary catalogue reference.

Automotive Replacement Part Specifications

Product type: Front Right Door Lower Molding

Primary OE reference: 75312-T0A-A01

Internal item code: HD02034-007

Vehicle brand: HONDA

Model: CR-V

Vehicle year: 2012-2016

Application: 2012-2016 HONDA CR-V

Installation position: Front right door, lower exterior edge

Product form: Straight elongated side-door trim

Cross-reference numbers: 75312-T0A-A01

Pre-Fit Procedure

Lay the replacement beside the removed strip to compare total span and clip orientation. Clean the contact area, present the part without pressure, and only engage the fasteners after every point aligns with the door.

Storage and Trade Supply

Long thin moldings should be stored flat with their ends supported. For wholesale requests, indicate whether the front and rear passenger-side pieces are being ordered together so each carton can be identified correctly.

Frequently Asked Questions

What position uses 75312-T0A-A01?

It is intended for the lower exterior of the front right door on the stated CR-V years.

Why should straightness be checked?

A bowed molding may create uneven contact or visible gaps along the long door edge.

Can the rear-door trim replace it?

No. Front and rear pieces have different lengths, end forms and clip spacing.

What should be cleaned before fitting?

Remove dirt, old adhesive and loose retainers from the lower-door mounting line.

Which data should appear on a purchase order?

Include OE 75312-T0A-A01, SKU HD02034-007, CR-V years, position and quantity.

Component scope: Long passenger-front lower-door trim for the 2012-2016 CR-V body.

Profile cue: Narrow straight molding with a subtle taper and directional end treatment.

Length comparison: Measure the front door span and compare both end cuts with the original molding.

Fastener alignment: Review the rear clip pattern and attachment spacing before pressing it to the door.

Exterior consistency: Match sheen and texture with the neighbouring rear-door lower trim.

Preparation step: Remove adhesive residue and test the entire lower-door contact line while dry.

Packaging check: Confirm the long trim has not bowed and that its tips remain protected.

Order information: State 75312-T0A-A01, SKU HD02034-007, front-right position and quantity.