74890-SDG-H01 Rear License Plate Bracket for 2006 HONDA Accord

74890-SDG-H01 Rear License Plate Bracket Overview

The Rear plate-support area on 2006 HONDA Accord uses the 74890-SDG-H01 design shown here. Compare the shape around the plate recess, the attachment points and adjacent trim before approving the replacement.

Plate Bracket Function and Body Interface

A correct match will follow the Rear fascia line and keep the plate or lamp area centred. Inspect the back-side guides and the visible edge before applying final fastening pressure.

OE Reference and Vehicle Matching

Match 74890-SDG-H01 with SKU HD02033-003, the Rear location and the listed model year (2006). If the vehicle has a market-specific bumper, use the OE label and a side-by-side photo to confirm the variant.

Product Specifications

Product type: Rear License Plate Bracket

Primary OE reference: 74890-SDG-H01

Internal item code: HD02033-003

Vehicle brand: HONDA

Model: Accord

Vehicle year: 2006

Application: 2006 HONDA Accord

Installation position: Rear

Market / trim: Standard vehicle specification

Cross-reference numbers: 74890-SDG-H01

Application-Specific Buying Notes

If the replacement is being refinished, compare the visible face and edge return before coating. The finish can vary by market, but the attachment geometry must remain consistent with 74890-SDG-H01.

For repeat orders, retain a reference photo showing the hole layout and lamp clearance. It gives purchasing and quality teams a practical check that is not captured by the vehicle name alone.

Installation and Inspection Notes

Clean the mating surface, place the support on the factory guides and check the edge gap from both sides. Tighten gradually so the fascia is not pulled out of alignment.

Wholesale Supply Context

A complete bulk request includes the application, OE reference, internal code and required count. If the customer is unsure of the trim, ask for a photo of the original bracket before confirming.

Frequently Asked Questions

How do I confirm the fitment for 74890-SDG-H01?

Check that 74890-SDG-H01, SKU HD02033-003, the 2006 HONDA Accord application and the Rear position all agree. Then compare the opening and fixing layout with the original part.

Is this a universal plate bracket?

No. It follows the body-side geometry listed for 2006 HONDA Accord; a universal-looking plate may still have different holes, clips or lamp clearance.

What should I compare before installation?

Compare the outer contour, edge return, hole or clip spacing and clearance to nearby lamps or trim. A dry fit should sit flush without forcing the fascia.

What details should a wholesale enquiry include?

Send the OE reference, internal SKU, vehicle and year, installation position, quantity, finish or market requirement and delivery destination.

Can the finish or market version change the selection?

It can change the visible trim or finish, while the mounting geometry must still match. Use Standard vehicle specification and the OE label as additional checks before ordering.

Fitment verification: Match the OE number with the vehicle, model year and installation position before ordering.

Body interface: Compare the plate recess, outer contour and edge return with the removed bracket or the vehicle fascia.

Mounting points: Confirm the hole spacing, clip locations and fastener direction line up with the factory support.

Clearance check: Make sure the plate or lamp opening clears nearby trim, wiring and bumper surfaces after the part is seated.

Installation sequence: Dry-fit first, centre the opening, engage all locating tabs and tighten fasteners evenly without forcing the fascia.