7425050ME0 Blower Motor for SUZUKI

7425050ME0 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 7425050ME0 to support OE-number comparison before purchase.

For catalogue item 6225-045, Cabin 7425050ME0 airflow depends on the 7425050ME0 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6225-045 when comparing this 7425050ME0 airflow configuration.

OE Reference and Application

The primary catalogue number is 7425050ME0 . The recorded application is SUZUKI. For 6225-045, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6225-045 with the approved OE reference.

HVAC Interface and 7425050ME0 installation

During work on 6225-045, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6225-045 before the lower trim is closed.

For item 6225-045, confirm that the 7425050ME0 centrifugal wheel clears its housing and that the 6225-045 connector lock engages without force. After seating 6225-045, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6225-045.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 7425050ME0

Cross-reference numbers: 7425050ME0

Vehicle brand: SUZUKI

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

7425050ME0 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6225-045, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6225-045 record remains the picking reference.

For trade item 6225-045, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6225-045 on the packing instruction.

Frequently Asked Questions

How should item 6225-045 and blower number 7425050ME0 be verified?

Match 6225-045 to the complete 7425050ME0 marking, then compare the 6225-045 plug, terminal count, mounting flange and wheel dimensions with the removed SUZUKI unit.

Can 6225-045 have more than one vehicle-side blower configuration?

Yes. SUZUKI production changes can affect 6225-045; confirm steering position, climate-control specification and the original 6225-045 geometry before approval.

What circuit checks are useful when 6225-045 does not operate?

For 6225-045, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6225-045 motor again.

Which details should accompany a wholesale request for 6225-045?

Provide item 6225-045, OE 7425050ME0, the stated application, quantity and destination; add 6225-045 carton or private-label requirements separately.

How can noise be avoided after fitting 6225-045?

Clear debris from the air inlet, check that the 6225-045 wheel turns freely, seat the 6225-045 flange evenly and keep wiring away from the impeller.

Request a quote for 6225-045: Send 7425050ME0, the 6225-045 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country