AutoParts

74150-57M00 Blower Motor for SUZUKI Jimny

Blower Motor — 74150-57M00. SUZUKI Jimny. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
74150-57M00
Supplier SKU
6225-044
Vehicle application
SUZUKI Jimny
Part type
Blower Motor
Send an inquiry

Key references

OE reference
74150-57M00
Supplier SKU
6225-044
Vehicle application
SUZUKI Jimny
Part type
Blower Motor

Product specifications

OE reference74150-57M00
Supplier SKU6225-044
Vehicle applicationSUZUKI Jimny
Vehicle makeSUZUKI
Vehicle modelJimny
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers74150-57M00

Product details

74150-57M00 Automotive Blower Motor Overview

This listing links 74150-57M00 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6225-044, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6225-044 when comparing this 74150-57M00 airflow configuration.

OE Reference and Application

The primary catalogue number is 74150-57M00 . The recorded application is SUZUKI Jimny. For 6225-044, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6225-044 with the approved OE reference.

HVAC Interface and 74150-57M00 installation

During work on 6225-044, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 74150-57M00 installation. Recheck 6225-044 before the lower trim is closed.

For item 6225-044, confirm that the 74150-57M00 centrifugal wheel clears its housing and that the 6225-044 connector lock engages without force. After seating 6225-044, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6225-044.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 74150-57M00

Cross-reference numbers: 74150-57M00

Vehicle brand: SUZUKI

Vehicle model: Jimny

Model year: Confirm by OE reference

74150-57M00 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6225-044, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6225-044 record remains the picking reference.

For trade item 6225-044, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6225-044 on the packing instruction.

Frequently Asked Questions

How should item 6225-044 and blower number 74150-57M00 be verified?

Match 6225-044 to the complete 74150-57M00 marking, then compare the 6225-044 plug, terminal count, mounting flange and wheel dimensions with the removed SUZUKI unit.

Can 6225-044 have more than one vehicle-side blower configuration?

Yes. SUZUKI production changes can affect 6225-044; confirm steering position, climate-control specification and the original 6225-044 geometry before approval.

What circuit checks are useful when 6225-044 does not operate?

For 6225-044, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6225-044 motor again.

Which details should accompany a wholesale request for 6225-044?

Provide item 6225-044, OE 74150-57M00, the stated application, quantity and destination; add 6225-044 carton or private-label requirements separately.

How can noise be avoided after fitting 6225-044?

Clear debris from the air inlet, check that the 6225-044 wheel turns freely, seat the 6225-044 flange evenly and keep wiring away from the impeller.

Request a quote for 6225-044: Send 74150-57M00, the 6225-044 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.