7266432 Blower Motor for FORD

7266432 Automotive Blower Motor Overview

This listing links 7266432 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6203-102, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-102 when comparing this 7266432 airflow configuration.

OE Reference and Application

The primary catalogue number is 7266432 . The recorded application is FORD. For 6203-102, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-102 with the approved OE reference.

HVAC Interface and 7266432 installation

During work on 6203-102, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 7266432 installation. Recheck 6203-102 before the lower trim is closed.

For item 6203-102, confirm that the 7266432 centrifugal wheel clears its housing and that the 6203-102 connector lock engages without force. After seating 6203-102, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-102.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 7266432

Cross-reference numbers: 5305136 / DS7H19846AA / 34223 / 87420

Vehicle brand: FORD

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

7266432 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-102, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-102 record remains the picking reference.

For trade item 6203-102, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6203-102 on the packing instruction.

Frequently Asked Questions

How should item 6203-102 and blower number 7266432 be verified?

Match 6203-102 to the complete 7266432 marking, then compare the 6203-102 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-102 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-102; confirm steering position, climate-control specification and the original 6203-102 geometry before approval.

What circuit checks are useful when 6203-102 does not operate?

For 6203-102, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-102 motor again.

Which details should accompany a wholesale request for 6203-102?

Provide item 6203-102, OE 7266432, the stated application, quantity and destination; add 6203-102 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-102?

Clear debris from the air inlet, check that the 6203-102 wheel turns freely, seat the 6203-102 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-102: Send 7266432, the 6203-102 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country