72223AG06A Blower Motor for SUBARU Impreza

72223AG06A Automotive Blower Motor Overview

The 72223AG06A record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6210-013, When the climate-control circuit commands 72223AG06A airflow, the electric motor rotates the 72223AG06A fan wheel inside the HVAC housing. Use 6210-013 when comparing this 72223AG06A airflow configuration.

OE Reference and Application

The primary catalogue number is 72223AG06A . The recorded application is SUBARU Impreza. For 6210-013, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6210-013 with the approved OE reference.

HVAC Interface and 72223AG06A installation

During work on 6210-013, If 72223AG06A airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 72223AG06A motor is the only cause. Recheck 6210-013 before the lower trim is closed.

For item 6210-013, confirm that the 72223AG06A centrifugal wheel clears its housing and that the 6210-013 connector lock engages without force. After seating 6210-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-013.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 72223AG06A

Cross-reference numbers: 72223AJ01A / 72223FJ000 / 72223AJ010 / 87103-42060 / 79220-SHJ-A01 / 8710302500 / TYC700202 / 8710302221 / 2727000760 / 8710302220

Vehicle brand: SUBARU

Vehicle model: Impreza

Model year: Confirm by OE reference

72223AG06A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6210-013, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-013 record remains the picking reference.

For trade item 6210-013, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-013 on the packing instruction.

Frequently Asked Questions

How should item 6210-013 and blower number 72223AG06A be verified?

Match 6210-013 to the complete 72223AG06A marking, then compare the 6210-013 plug, terminal count, mounting flange and wheel dimensions with the removed SUBARU unit.

Can 6210-013 have more than one vehicle-side blower configuration?

Yes. SUBARU production changes can affect 6210-013; confirm steering position, climate-control specification and the original 6210-013 geometry before approval.

What circuit checks are useful when 6210-013 does not operate?

For 6210-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-013 motor again.

Which details should accompany a wholesale request for 6210-013?

Provide item 6210-013, OE 72223AG06A, the stated application, quantity and destination; add 6210-013 carton or private-label requirements separately.

How can noise be avoided after fitting 6210-013?

Clear debris from the air inlet, check that the 6210-013 wheel turns freely, seat the 6210-013 flange evenly and keep wiring away from the impeller.

Request a quote for 6210-013: Send 72223AG06A, the 6210-013 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country