71734232 Blower Motor for FIAT Ducato

71734232 Automotive Blower Motor Overview

Reference 71734232 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6219-002, the 71734232 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6219-002 when comparing this 71734232 airflow configuration.

OE Reference and Application

The primary catalogue number is 71734232 . The recorded application is FIAT Ducato. For 6219-002, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6219-002 with the approved OE reference.

HVAC Interface and 71734232 installation

During work on 6219-002, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6219-002 before the lower trim is closed.

For item 6219-002, confirm that the 71734232 centrifugal wheel clears its housing and that the 6219-002 connector lock engages without force. After seating 6219-002, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-002.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 71734232

Cross-reference numbers: 46722702 / 069412522010 / 8EW351039371 / DEA09022 / 6441S4

Vehicle brand: FIAT

Vehicle model: Ducato

Model year: Confirm by OE reference

71734232 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6219-002, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6219-002 record remains the picking reference.

For trade item 6219-002, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6219-002 on the packing instruction.

Frequently Asked Questions

How should item 6219-002 and blower number 71734232 be verified?

Match 6219-002 to the complete 71734232 marking, then compare the 6219-002 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.

Can 6219-002 have more than one vehicle-side blower configuration?

Yes. FIAT production changes can affect 6219-002; confirm steering position, climate-control specification and the original 6219-002 geometry before approval.

What circuit checks are useful when 6219-002 does not operate?

For 6219-002, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-002 motor again.

Which details should accompany a wholesale request for 6219-002?

Provide item 6219-002, OE 71734232, the stated application, quantity and destination; add 6219-002 carton or private-label requirements separately.

How can noise be avoided after fitting 6219-002?

Clear debris from the air inlet, check that the 6219-002 wheel turns freely, seat the 6219-002 flange evenly and keep wiring away from the impeller.

Request a quote for 6219-002: Send 71734232, the 6219-002 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country