71520-TXE-H60 Rear Bumper Lip for HONDA UR-V 2021

71520-TXE-H60 forms a practical reference for replacement work involving panel alignment and trim interfaces. For 2021 HONDA UR-V, AutoParts tracks the requested rear bumper lip as HD02002-056.

HD02002-056 requires an application-specific review: The visible profile, mounting edges and equipment apertures must be compared with the removed lower-bumper part before refinishing begins. This sequence keeps catalogue selection separate from cosmetic preparation.

Panel Geometry Confirmation

Fitment guidance for 71520-TXE-H60. Check production transitions carefully when the stated year sits near a facelift. Catalogue month ranges can be more reliable than a registration year alone. This review is especially useful near model-year or equipment transitions.

The rear location on 2021 HONDA UR-V should be reviewed as follows: Review the application in the parts catalogue and then measure or photograph the removed panel. A facelift boundary or market-specific trim grade may require a different cover. The result should be recorded before commercial release of the requested quantity.

Product Technical Specifications

Product type: Rear Bumper Lip

Primary OE reference: 71520-TXE-H60

Cross-reference numbers: 71520-TXE-H60

Internal item code: HD02002-056

Vehicle brand: HONDA

Vehicle model: UR-V

Model year: 2021

Installation position: Rear lower bumper area

Applicable vehicle: 2021 HONDA UR-V

Restoring the Vehicle Body Line

Functional context for 71520-TXE-H60. The component is a finish-critical exterior item, so packing, storage and workshop handling can influence the result as much as catalogue selection. A dated photo record makes the decision easier to review if questions arise later.

Application note for item HD02002-056. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. Those observations should remain available during sample and bulk-order review.

Body-Shop Preparation Notes

Receiving note for carton HD02002-056. Check for transit pressure marks, edge distortion, scratches and incomplete apertures. Photograph any concern before sanding, drilling, trimming or painting changes the supplied condition. That comparison gives the workshop a clearer basis for a pre-paint decision.

Pre-finish check for 2021 HONDA UR-V. Do not judge the panel while it is twisted on the floor or leaning against a sharp edge. Support it near its designed mounting orientation before checking contour. This approach reduces dependence on exterior appearance alone.

Preparing a B2B bumper lip Enquiry

A quotation for 71520-TXE-H60 should reflect this guidance: When purchasing for distribution, list the target model years and sales markets. That context helps identify catalogue transitions that deserve additional verification. This evidence belongs in the same approval file as the vehicle photographs.

The 2 square images attached to HD02002-056 support visual review. Discuss corner protection, face separation and keep-flat handling marks before production packing. Large exterior panels need protection from both abrasion and concentrated pressure. A dated photo record makes the decision easier to review if questions arise later.

Frequently Asked Questions

What confirms the application of OE 71520-TXE-H60?

2021 HONDA UR-V is the stated reference for this page. Photograph the surrounding grille, lamps and adjacent body panels as well as the removed lower-bumper part. These interfaces help distinguish similar designs. The same information helps receiving staff identify the correct carton and panel.

How can a buyer avoid confusing HD02002-056 with another cover?

Supplier-code context for this rear bumper lip. Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. Keep HD02002-056 beside 71520-TXE-H60 in the final commercial record.

What needs to align around lamps, grilles and retainers?

Panel-comparison guidance for 2021 HONDA UR-V. Check the OE reference first and use physical evidence second. Do not approve from an online image or exterior colour alone. The repairer should document the outcome before transferring trim components.

How does a dry fit protect the refinishing investment?

Finishing guidance for OE 71520-TXE-H60. The body shop should verify the complete assembly interface before any irreversible preparation is carried out. The same information helps receiving staff identify the correct carton and panel.

What belongs in the purchase brief for 2021 HONDA UR-V?

Wholesale request for HD02002-056. Keep the OE reference and internal code on every enquiry revision, purchase order and packing confirmation to reduce mix-ups during consolidation. This review is especially useful near model-year or equipment transitions.

Request a Quote for 71520-TXE-H60

Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. For AutoParts’s review, connect 71520-TXE-H60 and HD02002-056 with the intended 2021 HONDA UR-V, requested quantity and delivery market.

Verification: Use the complete reference 71520-TXE-H60; then confirm market version, trim equipment and the condition of vehicle-side retainers.

Supply note: State mixed-order requirements, carton marks and pre-shipment photo needs at the quotation stage.