71508-TKM-H51 Bumper Garnish Panel for HONDA Elysion 2022 Left

71508-TKM-H51 Bumper Garnish Panel Product Overview

OE number 71508-TKM-H51 is the primary lookup key for this bumper garnish panel listed for HONDA Elysion 2022. The 2022 specification and supplier code HD02005-162 help distinguish it from neighbouring facelift or market variants.

Before ordering this left trim, compare the old part with 71508-TKM-H51. Also verify the mounting side, compare gloss or plating, clean the mounting channel, and request protective inner packing.

Fitment and Application for Elysion

Before the removed component is discarded, confirm the surface specification, match the original clip spacing, and confirm the vehicle market. Before clips or hardware are transferred, confirm the production year, review facelift differences, and inspect the original contour.

During an OE-led check for HD02005-162, confirm the production year, compare every attachment point, and check the vehicle build date. During the physical comparison, match the original clip spacing, match the stated body style, and check nearby lamp openings.

For wholesale selection of 71508-TKM-H51, check nearby lamp openings, check adjacent garnish pieces, and verify the mounting side. When checking the visible exterior face, compare the removed trim, confirm the production year, and review market-specific styling.

Bumper Garnish Panel Design and Replacement Notes

When preparing a Elysion exterior repair, check the bumper interface, review the outer-edge shape, and check the moulding curvature. For a no-force trial fit, check the panel transition, check the adjoining gap, and check the bumper interface.

During comparison with the original bumper trim, compare the original edge profile, review the surface texture, and check the bumper interface. While checking adjacent body parts, inspect the locator direction, compare gloss or plating, and review nearby cover openings.

For a replacement on the left rear area, check the panel transition, compare gloss or plating, and check the adjoining gap. Before clips or hardware are transferred, compare the original length, check the bumper interface, and compare visible edge height.

For a direct comparison of 71508-TKM-H51, check nearby lamp openings, review the centre alignment, review separate hardware needs, and state the required quantity. The bumper garnish panel should match the original left rear profile before it is installed or released for shipment.

Installation Guidance

Before the removed component is discarded, review the completed alignment, trial-fit without force, and avoid bending long sections. Before the quotation is confirmed, review separate hardware needs, clean the mounting channel, and transfer reusable clips carefully.

During an OE-led check for HD02005-162, trial-fit without force, align the centre first, and inspect damaged mounting points. Before packing the confirmed item, transfer reusable clips carefully, check adjacent panel gaps, and confirm locator engagement.

For wholesale selection of 71508-TKM-H51, avoid bending long sections, confirm the fitting direction, and confirm an even seated fit. For a no-force trial fit, clean the mounting channel, align the centre first, and confirm locator engagement.

Product Technical Specifications

Product type: Bumper Garnish Panel

Primary OE reference: 71508-TKM-H51

Cross-reference numbers: 71508-TKM-H51 71508TKMH51

Internal item code: HD02005-162

Vehicle brand: HONDA

Vehicle model: Elysion

Model year: 2022

Installation area: Rear

Side / orientation: Left

Surface detail: verify against the original part

Applicable vehicle: HONDA Elysion 2022

Wholesale Supply and Packing

When preparing a Elysion exterior repair, provide the delivery country, retain the product label, and request export quotation terms. Before final installation, include the complete OE number, state the target application, and state the destination port.

During comparison with the original bumper trim, support the moulding length, confirm sample requirements, and confirm separate accessory needs. During receiving inspection, state annual purchasing volume, state the destination port, and state the required quantity.

For a replacement on the left rear area, confirm separate accessory needs, state the destination port, and include the complete OE number. Before the quotation is confirmed, retain the product label, check the ordered mounting side, and request protective inner packing.

For 71508-TKM-H51, align finish acceptance, quantity, delivery schedule and carton protection under item HD02005-162. The verify against the original part surface should be documented before a production lot is released.

Frequently Asked Questions

What product does OE 71508-TKM-H51 identify?

71508-TKM-H51 is listed here as a bumper garnish panel. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Elysion, match the stated body style, check the moulding curvature, trial-fit without force, and confirm separate accessory needs before installation or quotation.

How should the position of 71508-TKM-H51 be confirmed?

This listing specification details a left component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Elysion, review market-specific styling, inspect the back-side structure, check the final perimeter, and inspect the receiving condition before installation or quotation.

Why should supplier code HD02005-162 stay on the enquiry?

HD02005-162 connects the 71508-TKM-H51 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For Elysion, match the original clip spacing, compare the end termination, confirm locator engagement, and include the complete OE number before installation or quotation.

Can a photo alone verify 71508-TKM-H51?

A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71508-TKM-H51 and HD02005-162 with the removed part dimensions. For Elysion, verify the mounting side, review nearby cover openings, clean the mounting channel, and confirm the delivery schedule before installation or quotation.

Is professional installation recommended for 71508-TKM-H51?

Yes. A workshop can dry-fit HD02005-162, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Elysion, check the vehicle build date, check the panel transition, confirm the fitting direction, and check the ordered mounting side before installation or quotation.

Request a Quote

Send the complete OE reference 71508-TKM-H51 , vehicle details, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment note: confirm the production year; confirm the installation position; check adjacent garnish pieces before ordering 71508-TKM-H51

Product comparison: compare the original length; inspect the fastening slots; review the outer-edge shape against the removed bumper garnish panel

Installation note: confirm locator engagement; transfer reusable clips carefully; align the centre first on the Elysion

Wholesale enquiry: check the ordered mounting side; confirm the delivery schedule; include the complete OE number for HD02005-162