71507-TBT-H01 Bumper Trim Molding for HONDA Crider 2019 Right

71507-TBT-H01 Bumper Trim Molding Product Overview

This application-led listing presents 71507-TBT-H01 as a bumper trim molding for HONDA Crider 2019. Item HD02005-057 is intended for OE-number comparison rather than shape-only selection.

For replacement work on HONDA Crider 2019, retain the old trim until trial fitting is complete. Also match the stated body style, review the centre alignment, clean the mounting channel, and confirm sample requirements.

Fitment and Application for Crider

For HONDA Crider 2019, confirm the installation position, check the vehicle build date, and confirm the surface specification. Before packing the confirmed item, compare the mounting direction, confirm the production year, and verify the mounting side.

When preparing a Crider exterior repair, confirm the surface specification, confirm the production year, and check nearby lamp openings. For a no-force trial fit, review the end profiles, compare the complete OE number, and compare every attachment point.

During comparison with the original bumper trim, confirm the production year, match the stated body style, and review facelift differences. While checking adjacent body parts, verify the mounting side, inspect the original contour, and compare every attachment point.

Bumper Trim Molding Design and Replacement Notes

For the listed 2019 application, inspect the fastening slots, check the adjoining gap, and review nearby cover openings. During receiving inspection, compare the original edge profile, inspect the fastening slots, and check the adjoining gap.

Before the removed component is discarded, review transferred hardware, examine the visible finish, and review the surface texture. Before the quotation is confirmed, review nearby cover openings, review the centre alignment, and review transferred hardware.

During an OE-led check for HD02005-057, inspect the moulding width, compare the original edge profile, and review the centre alignment. Before packing the confirmed item, check the panel transition, inspect narrow moulding ends, and compare the original length.

For a direct comparison of 71507-TBT-H01, match the bumper outline, compare gloss or plating, trial-fit without force, and retain the product label. The bumper trim molding should match the original right rear profile before it is installed or released for shipment.

Installation Guidance

For HONDA Crider 2019, align the centre first, check lamp-cover clearance, and review the completed alignment. While reviewing the supplied photographs, align the centre first, check lamp-cover clearance, and review the completed alignment.

When preparing a Crider exterior repair, retain the removed component, inspect every screw point, and protect painted panel edges. Before final installation, check the final perimeter, review the completed alignment, and confirm the final trim gap.

During comparison with the original bumper trim, check the final perimeter, clean the mounting channel, and inspect damaged mounting points. During receiving inspection, retain the removed component, review separate hardware needs, and confirm the final trim gap.

Product Technical Specifications

Product type: Bumper Trim Molding

Primary OE reference: 71507-TBT-H01

Cross-reference numbers: 71507-TBT-H01 71507TBTH01

Internal item code: HD02005-057

Vehicle brand: HONDA

Vehicle model: Crider

Model year: 2019

Installation area: Rear

Side / orientation: Right

Surface detail: verify against the original part

Applicable vehicle: HONDA Crider 2019

Wholesale Supply and Packing

For the listed 2019 application, send original-part photographs, include the complete OE number, and confirm the surface requirement. At the workshop preparation stage, request supported carton packing, protect projecting locators, and support the moulding length.

Before the removed component is discarded, inspect the receiving condition, review carton edge protection, and state annual purchasing volume. For a repeat wholesale order, confirm the delivery schedule, send original-part photographs, and protect projecting locators.

During an OE-led check for HD02005-057, compare the supplied photographs, request protective inner packing, and protect projecting locators. While reviewing the supplied photographs, confirm separate accessory needs, confirm the delivery schedule, and request supported carton packing.

Distributors sourcing 71507-TBT-H01 should keep HD02005-057 and the right position on every quotation revision. Sample confirmation, carton marking and repeat-order specification details should use the same part number chain.

Frequently Asked Questions

Does 71507-TBT-H01 have a fixed surface finish?

The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Crider, confirm the surface specification, inspect the back-side structure, check lamp-cover clearance, and confirm the packing method before installation or quotation.

Is a model name alone enough to order 71507-TBT-H01?

No. The Crider name is useful for discovery, but OE number 71507-TBT-H01, VIN or build data, side, finish and physical attachment points should agree. For Crider, match the stated body style, compare the end termination, trial-fit without force, and confirm separate accessory needs before installation or quotation.

What should be inspected when 71507-TBT-H01 arrives?

Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Crider, review market-specific styling, review nearby cover openings, check the final perimeter, and inspect the receiving condition before installation or quotation.

What information is needed for a 71507-TBT-H01 quotation?

Send HONDA Crider 2019 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Crider, match the original clip spacing, check the panel transition, confirm locator engagement, and include the complete OE number before installation or quotation.

How should 71507-TBT-H01 be packed for export?

Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Crider, verify the mounting side, inspect the moulding width, clean the mounting channel, and confirm the delivery schedule before installation or quotation.

Request a Quote

Send the complete OE reference 71507-TBT-H01 , vehicle details, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment note: review the end profiles; check the vehicle build date; verify the mounting side before ordering 71507-TBT-H01

Product comparison: inspect the moulding width; check the adjoining gap; review the centre alignment against the removed bumper trim molding

Installation note: protect painted panel edges; clean the mounting channel; check adjacent panel gaps on the Crider

Wholesale enquiry: inspect the receiving condition; retain the product label; inspect the receiving condition for HD02005-057