71503-TW1-H02 Rear Bumper Lower Garnish for HONDA Crosstour 2014

71503-TW1-H02 is prepared for buyers who need a clear bumper-lip reference before paint and assembly work. For 2014 HONDA Crosstour, AutoParts tracks the requested rear bumper lower garnish as HD02002-014.

HD02002-014 requires an application-specific review: the lower-bumper component should be examined against the grille, fender and lamp boundaries that define the final installed appearance. The purchase team can use the recorded result when confirming the order line.

Pre-Paint Fitment Confirmation

Fitment guidance for 71503-TW1-H02. Ask the workshop to identify every transferable component from the removed lower-bumper part. Grilles, lamps, mouldings, sensors and fasteners are normally reviewed separately from the outer panel. Those observations should remain available during sample and bulk-order review.

The rear location on 2014 HONDA Crosstour should be reviewed as follows: The safest release method is VIN review, OE confirmation and trial alignment in that order. Painting should only follow after the workshop accepts the dry fit. This review is especially useful near model-year or equipment transitions.

Product Technical Specifications

Product type: Rear Bumper Lower Garnish

Primary OE reference: 71503-TW1-H02

Cross-reference numbers: 71503-TW1-H02

Internal item code: HD02002-014

Vehicle brand: HONDA

Vehicle model: Crosstour

Model year: 2014

Installation position: Rear lower bumper area

Applicable vehicle: 2014 HONDA Crosstour

Role in Exterior Repair

Functional context for 71503-TW1-H02. Because the component spans a wide area of the vehicle, small mounting differences can affect several gaps at once. Correct reference selection is therefore more reliable than visual guessing. This evidence belongs in the same approval file as the vehicle photographs.

Application note for item HD02002-014. Exterior repair quality is influenced by how the lower-bumper component meets retainers and adjacent panels. A careful trial fit helps identify bracket damage before finishing work starts. That comparison gives the workshop a clearer basis for a pre-paint decision.

Inspection of Corners, Tabs and Openings

Receiving note for carton HD02002-014. Keep the panel wrapped until a clean inspection area is available. Dust, metal filings and nearby body-shop work can mark the visible surface before painting starts. Those observations should remain available during sample and bulk-order review.

Pre-finish check for 2014 HONDA Crosstour. Confirm the quantity of loose covers and associated packing labels at receipt. Keep each item code linked to its carton until the fitment sample has been approved. The buyer can then connect the physical review to the supplier item record.

B2B Sourcing and Shipment Preparation

A quotation for 71503-TW1-H02 should reflect this guidance: Provide the expected packaging method, label language and pallet requirements. Buyers should also identify any inspection standard that must appear on the order file. Those observations should remain available during sample and bulk-order review.

The 3 square images attached to HD02002-014 support visual review. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. The repairer should document the outcome before transferring trim components.

Frequently Asked Questions

How is fitment assessed for OE 71503-TW1-H02?

2014 HONDA Crosstour is the stated reference for this page. Review production date and regional specification in addition to the model name. Closely related variants can use different hidden fixing patterns. The buyer can then connect the physical review to the supplier item record.

How does HD02002-014 support order traceability?

Supplier-code context for this rear bumper lower garnish. Provide the purchasing contact, technical contact and delivery location. Separating commercial and fitment questions can speed up approval of the order. Keep HD02002-014 beside 71503-TW1-H02 in the final commercial record.

Which exterior features support a reliable panel match?

Panel-comparison guidance for 2014 HONDA Crosstour. Match the complete OE code with the VIN, build date, stated application and photographs of the removed lower-bumper part. Approve the part only when those records and the visible panel geometry agree. The result should be recorded before commercial release of the requested quantity.

Which inspection result allows finishing work to proceed?

Finishing guidance for OE 71503-TW1-H02. Separate geometry approval from cosmetic preparation. If alignment needs force, stop and inspect the reference and vehicle-side retainers. The purchase team can use the recorded result when confirming the order line.

Which packaging and destination facts support a useful quotation?

Wholesale request for HD02002-014. For bulk demand, identify the accepted sample or previous order and add the new quantity, destination and any updated label instructions. The repairer should document the outcome before transferring trim components.

Request a Quote for 71503-TW1-H02

For repeat supply, reference the previously accepted sample or purchase order. Do not rely only on a shortened product description when multiple variants exist. For AutoParts’s review, connect 71503-TW1-H02 and HD02002-014 with the intended 2014 HONDA Crosstour, requested quantity and delivery market.

Verification: Keep photographic evidence of the original cover with the fitment approval for HD02002-014.

Supply note: Confirm sample approval, surface-inspection criteria and loading preferences before repeat supply.