71503-T4N-H70 Bumper Trim Molding for HONDA Jade 2017 Right

71503-T4N-H70 Bumper Trim Molding Product Overview

For HONDA Jade 2017 exterior repair sourcing, OE reference 71503-T4N-H70 points to the listed bumper trim molding. Catalogue code HD02005-035 belongs to the rear area and should be checked as an application-specific component.

A correct HD02005-035 selection should follow the original contour, finish and clip direction. Also match the bumper outline, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.

Fitment and Application for Jade

When comparing 71503-T4N-H70 with the removed part, check nearby lamp openings, check adjacent garnish pieces, and verify the mounting side. Before final installation, compare the removed trim, confirm the production year, and review market-specific styling.

For the listed 2017 application, review the end profiles, match the original clip spacing, and compare the complete OE number. During receiving inspection, review facelift differences, compare every attachment point, and review market-specific styling.

Before the removed component is discarded, compare the complete OE number, compare every attachment point, and compare the removed trim. Before the quotation is confirmed, confirm the vehicle market, inspect the original contour, and check the vehicle build date.

Bumper Trim Molding Design and Replacement Notes

Before confirming this verify against the original part bumper trim molding, compare gloss or plating, check the adjoining gap, and compare the original length. For a repeat wholesale order, check the bumper interface, compare visible edge height, and review the outer-edge shape.

For HONDA Jade 2017, check the bumper interface, examine the visible finish, and compare the end termination. While reviewing the supplied photographs, inspect narrow moulding ends, check the bumper interface, and examine the visible finish.

When preparing a Jade exterior repair, compare the original edge profile, compare gloss or plating, and compare visible edge height. Before final installation, compare the end termination, compare the original length, and compare the original edge profile.

For a direct comparison of 71503-T4N-H70, compare the mounting direction, review the outer-edge shape, inspect the surrounding guides, and state the target application. The bumper trim molding should match the original right rear profile before it is installed or released for shipment.

Installation Guidance

When comparing 71503-T4N-H70 with the removed part, check lamp-cover clearance, review separate hardware needs, and inspect the surrounding guides. When checking the visible exterior face, protect the visible surface, transfer reusable clips carefully, and retain the removed component.

For the listed 2017 application, confirm an even seated fit, trial-fit without force, and retain the removed component. At the workshop preparation stage, confirm an even seated fit, trial-fit without force, and retain the removed component.

Before the removed component is discarded, protect the visible surface, align the centre first, and transfer reusable clips carefully. For a repeat wholesale order, confirm locator engagement, retain the removed component, and inspect every screw point.

Product Technical Specifications

Product type: Bumper Trim Molding

Primary OE reference: 71503-T4N-H70

Cross-reference numbers: 71503-T4N-H70 71503T4NH70

Internal item code: HD02005-035

Vehicle brand: HONDA

Vehicle model: Jade

Model year: 2017

Installation area: Rear

Side / orientation: Right

Surface detail: verify against the original part

Applicable vehicle: HONDA Jade 2017

Wholesale Supply and Packing

Before confirming this verify against the original part bumper trim molding, confirm separate accessory needs, state the destination port, and include the complete OE number. Before clips or hardware are transferred, retain the product label, check the ordered mounting side, and request protective inner packing.

For HONDA Jade 2017, state the destination port, confirm the delivery schedule, and request protective inner packing. During the physical comparison, state the required quantity, provide the delivery country, and send original-part photographs.

When preparing a Jade exterior repair, include the complete OE number, support the moulding length, and state the target application. When checking the visible exterior face, check the ordered mounting side, state the destination port, and provide the delivery country.

Before commercial confirmation, verify that the offer cites 71503-T4N-H70, HD02005-035 and the right application. Ask for packaging that supports the moulding length without rubbing its visible face.

Frequently Asked Questions

Can a photo alone verify 71503-T4N-H70?

A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71503-T4N-H70 and HD02005-035 with the removed part dimensions. For Jade, match the original clip spacing, compare visible edge height, check the final perimeter, and support the moulding length before installation or quotation.

Is professional installation recommended for 71503-T4N-H70?

Yes. A workshop can dry-fit HD02005-035, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Jade, verify the mounting side, review the surface texture, confirm locator engagement, and send original-part photographs before installation or quotation.

Can the opposite-side trim replace 71503-T4N-H70?

Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Jade, check the vehicle build date, review the outer-edge shape, clean the mounting channel, and state the destination port before installation or quotation.

What product does OE 71503-T4N-H70 identify?

71503-T4N-H70 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Jade, confirm the vehicle market, inspect narrow moulding ends, confirm the fitting direction, and compare the supplied photographs before installation or quotation.

How should the position of 71503-T4N-H70 be confirmed?

This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Jade, compare every attachment point, compare the original edge profile, inspect damaged mounting points, and retain the product label before installation or quotation.

Request a Quote

Send the complete OE reference 71503-T4N-H70 , vehicle details, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment note: review facelift differences; confirm the vehicle market; match the bumper outline before ordering 71503-T4N-H70

Product comparison: review the surface texture; compare the original edge profile; inspect the back-side structure against the removed bumper trim molding

Installation note: transfer reusable clips carefully; review separate hardware needs; trial-fit without force on the Jade

Wholesale enquiry: confirm the surface requirement; retain the product label; compare the supplied photographs for HD02005-035