71502-TP0-R00 Rear Bumper Lower Garnish for HONDA Crosstour 2011

71502-TP0-R00 gives distributors a part-number-specific starting point for repair-market quotations. For 2011 HONDA Crosstour, AutoParts tracks the requested rear bumper lower garnish as HD02002-012.

HD02002-012 requires an application-specific review: Approval should combine catalogue evidence with the VIN, production date and clear photographs of the original part. This sequence keeps catalogue selection separate from cosmetic preparation.

Fitment Checks for Regional Variants

Fitment guidance for 71502-TP0-R00. Review the application in the parts catalogue and then measure or photograph the removed panel. A facelift boundary or market-specific trim grade may require a different cover. This review is especially useful near model-year or equipment transitions.

The rear location on 2011 HONDA Crosstour should be reviewed as follows: Check the side retainer areas, upper fixing line and lower mounting pattern. Similar exterior styling does not guarantee that hidden attachment geometry is interchangeable. The result should be recorded before commercial release of the requested quantity.

Product Technical Specifications

Product type: Rear Bumper Lower Garnish

Primary OE reference: 71502-TP0-R00

Cross-reference numbers: 71502-TP0-R00

Internal item code: HD02002-012

Vehicle brand: HONDA

Vehicle model: Crosstour

Model year: 2011

Installation position: Rear lower bumper area

Applicable vehicle: 2011 HONDA Crosstour

Exterior Protection and Appearance

Functional context for 71502-TP0-R00. This component provides the styled exterior surface around the underlying bumper structure. The final appearance depends on accurate corner shape, consistent panel gaps and correct trim interfaces. A dated photo record makes the decision easier to review if questions arise later.

Application note for item HD02002-012. the lower-bumper component interfaces with multiple surrounding parts rather than working in isolation. Grille, lamp, moulding and retainer compatibility should be reviewed as part of the repair plan. Those observations should remain available during sample and bulk-order review.

Workshop Storage and Trial Fit

Receiving note for carton HD02002-012. Allow the panel to rest in a supported position after unpacking, especially when transport packaging has constrained its shape. Compare the relaxed outline with the original before making a fit judgement. That comparison gives the workshop a clearer basis for a pre-paint decision.

Pre-finish check for 2011 HONDA Crosstour. Trial fit with undamaged vehicle-side hardware and avoid forcing clips into position. Excessive pressure can hide an incorrect reference or create permanent deformation. This approach reduces dependence on exterior appearance alone.

Export Purchasing Notes

A quotation for 71502-TP0-R00 should reflect this guidance: Request packing dimensions and gross-volume estimates before finalising freight. bumper lips and lower valances can be lightweight but consume substantial shipment space. This evidence belongs in the same approval file as the vehicle photographs.

The 2 square images attached to HD02002-012 support visual review. Confirm whether samples require workshop trial fitting before bulk release. A documented approval stage is valuable when supplying several regional vehicle variants. A dated photo record makes the decision easier to review if questions arise later.

Frequently Asked Questions

What is the safest way to review OE 71502-TP0-R00?

2011 HONDA Crosstour is the stated reference for this page. Compare left and right corner shape, the main edge line and all functional cut-outs. The overall styling view is not enough for approval. The same information helps receiving staff identify the correct carton and panel.

How can a buyer avoid confusing HD02002-012 with another cover?

Supplier-code context for this rear bumper lower garnish. If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer lower-bumper component unless a quotation states otherwise. Keep HD02002-012 beside 71502-TP0-R00 in the final commercial record.

What needs to align around lamps, grilles and retainers?

Panel-comparison guidance for 2011 HONDA Crosstour. Photograph the surrounding grille, lamps and adjacent body panels as well as the removed lower-bumper part. These interfaces help distinguish similar designs. The repairer should document the outcome before transferring trim components.

How does a dry fit protect the refinishing investment?

Finishing guidance for OE 71502-TP0-R00. Photograph the received condition, relax the panel on suitable supports and trial fit it before changing the supplied surface. The same information helps receiving staff identify the correct carton and panel.

What belongs in the purchase brief for 2011 HONDA Crosstour?

Wholesale request for HD02002-012. Provide the OE code, supplier item number, delivery market and carton requirements. Add original-part photographs when regional fitment may vary. This review is especially useful near model-year or equipment transitions.

Request a Quote for 71502-TP0-R00

Identify any barcode, carton mark or language requirement in advance. The agreed label should retain both the buyer reference and the supplier item code. For AutoParts’s review, connect 71502-TP0-R00 and HD02002-012 with the intended 2011 HONDA Crosstour, requested quantity and delivery market.

Verification: Use the complete reference 71502-TP0-R00; then confirm market version, trim equipment and the condition of vehicle-side retainers.

Supply note: Quote HD02002-012, order quantity, destination, packing method and sample requirements.