71335-3L1-T50 Bumper Garnish Panel for HONDA XR-V 2024 Right

71335-3L1-T50 Bumper Garnish Panel Product Overview

OE number 71335-3L1-T50 is the primary lookup key for this bumper garnish panel listed for HONDA XR-V 2024. The 2024 specification and supplier code HD02005-128 help distinguish it from neighbouring facelift or market variants.

The stated application is HONDA XR-V 2024, with front placement and right orientation. Also review market-specific styling, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.

Fitment and Application for XR-V

Before the removed component is discarded, compare every attachment point, compare the removed trim, and confirm the vehicle market. Before clips or hardware are transferred, inspect the original contour, check the vehicle build date, and compare the mounting direction.

During an OE-led check for HD02005-128, compare the removed trim, review the end profiles, and confirm the surface specification. During the physical comparison, check adjacent garnish pieces, match the original clip spacing, and compare the mounting direction.

For wholesale selection of 71335-3L1-T50, confirm the vehicle market, review facelift differences, and check nearby lamp openings. When checking the visible exterior face, check the vehicle build date, check adjacent garnish pieces, and compare the complete OE number.

Bumper Garnish Panel Design and Replacement Notes

When preparing a XR-V exterior repair, check the adjoining gap, review the outer-edge shape, and check the panel transition. For a no-force trial fit, check the bumper interface, check the moulding curvature, and check the adjoining gap.

During comparison with the original bumper trim, compare visible edge height, examine the visible finish, and check the moulding curvature. While checking adjacent body parts, inspect the fastening slots, compare gloss or plating, and review transferred hardware.

For a replacement on the right front area, check the moulding curvature, compare gloss or plating, and check the bumper interface. Before clips or hardware are transferred, compare the original edge profile, check the panel transition, and compare the original length.

For a direct comparison of 71335-3L1-T50, review market-specific styling, check the panel transition, confirm the final trim gap, and state the target application. The bumper garnish panel should match the original right front profile before it is installed or released for shipment.

Installation Guidance

Before the removed component is discarded, review the completed alignment, confirm the final trim gap, and support the trim evenly. Before the quotation is confirmed, trial-fit without force, inspect damaged mounting points, and check adjacent panel gaps.

During an OE-led check for HD02005-128, trial-fit without force, confirm locator engagement, and confirm the fitting direction. Before packing the confirmed item, review the completed alignment, protect the visible surface, and check adjacent panel gaps.

For wholesale selection of 71335-3L1-T50, avoid bending long sections, confirm an even seated fit, and align the centre first. For a no-force trial fit, inspect every screw point, confirm the final trim gap, and check adjacent panel gaps.

Product Technical Specifications

Product type: Bumper Garnish Panel

Primary OE reference: 71335-3L1-T50

Cross-reference numbers: 71335-3L¹-T50 71335-3L1-T50 713353L1T50

Internal item code: HD02005-128

Vehicle brand: HONDA

Vehicle model: XR-V

Model year: 2024

Installation area: Front

Side / orientation: Right

Surface detail: verify against the original part

Applicable vehicle: HONDA XR-V 2024

Wholesale Supply and Packing

When preparing a XR-V exterior repair, request supported carton packing, retain the product label, and confirm separate accessory needs. Before final installation, request export quotation terms, request protective inner packing, and include the complete OE number.

During comparison with the original bumper trim, state the target application, confirm the packing method, and include the complete OE number. During receiving inspection, confirm sample requirements, request export quotation terms, and send original-part photographs.

For a replacement on the right front area, request export quotation terms, state the destination port, and request protective inner packing. Before the quotation is confirmed, provide the delivery country, include the complete OE number, and request supported carton packing.

For 71335-3L1-T50, align finish acceptance, quantity, delivery schedule and carton protection under item HD02005-128. The verify against the original part surface should be documented before a production lot is released.

Frequently Asked Questions

What product does OE 71335-3L1-T50 identify?

71335-3L1-T50 is listed here as a bumper garnish panel. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For XR-V, confirm the vehicle market, review the outer-edge shape, review the completed alignment, and state the target application before installation or quotation.

How should the position of 71335-3L1-T50 be confirmed?

This listing specification details a right component for the front area. Compare the removed part, mounting direction and termination points before confirmation. For XR-V, compare every attachment point, inspect narrow moulding ends, retain the removed component, and protect projecting locators before installation or quotation.

Why should supplier code HD02005-128 stay on the enquiry?

HD02005-128 connects the 71335-3L1-T50 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For XR-V, review the end profiles, compare the original edge profile, protect the visible surface, and provide the delivery country before installation or quotation.

Can a photo alone verify 71335-3L1-T50?

A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71335-3L1-T50 and HD02005-128 with the removed part dimensions. For XR-V, confirm the production year, review transferred hardware, review separate hardware needs, and confirm the packing method before installation or quotation.

Is professional installation recommended for 71335-3L1-T50?

Yes. A workshop can dry-fit HD02005-128, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For XR-V, confirm the installation position, check the moulding curvature, check adjacent panel gaps, and confirm separate accessory needs before installation or quotation.

Request a Quote

Send the complete OE reference 71335-3L1-T50 , vehicle details, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment note: review market-specific styling; match the bumper outline; confirm the surface specification before ordering 71335-3L1-T50

Product comparison: examine the visible finish; compare gloss or plating; inspect the moulding width against the removed bumper garnish panel

Installation note: check the final perimeter; inspect every screw point; confirm locator engagement on the XR-V

Wholesale enquiry: confirm the surface requirement; retain the product label; compare the supplied photographs for HD02005-128