71198-SAA-003 Front Left Bumper Bracket for HONDA Fit 2004

71198-SAA-003 Front Left Bumper Bracket Product Overview

71198-SAA-003 is listed as a front left bumper bracket used in the front area of HONDA Fit 2004. Check the complete number, vehicle build and attachment layout before installation.

Fitment and Application for Fit

For HONDA Fit 2004, match the original hole spacing, verify the mounting side, and check the vehicle build date. Before packing the confirmed item, confirm the vehicle market, compare every fixing point, and review the bracket orientation.

When preparing a Fit bumper repair, review facelift differences, inspect the original bracket, and check nearby lamp openings. For a no-force trial fit, review market-specific styling, check the vehicle build date, and review the bracket orientation.

During comparison with the original support, review market-specific styling, confirm the material specification, and compare the complete OE number. While checking adjacent body parts, inspect the original bracket, match the bumper outline, and check adjacent body parts.

Front Left Bumper Bracket Design and Replacement Notes

For the listed 2004 application, inspect narrow bracket ends, check the adjoining gap, and review transferred hardware. During receiving inspection, compare the original length, inspect the back-side structure, and check the bumper interface.

Before the removed bracket is discarded, review nearby cover openings, examine the moulded surface, and review the centre alignment. Before the quotation is confirmed, review the surface texture, review transferred hardware, and review nearby cover openings.

During an OE-led check for HD02007-074, inspect the locator direction, compare reinforcement ribs, and review nearby cover openings. Before packing the confirmed item, check the bracket curvature, inspect narrow bracket ends, and compare mounting-hole height.

For a direct comparison of 71198-SAA-003, review the bracket orientation, compare the original length, avoid bending plastic tabs, and state the target application. The bracket should match the original left front position before shipment.

Installation Guidance

For HONDA Fit 2004, align the centre first, check adjacent panel gaps, and retain the removed bracket. While reviewing the supplied photographs, confirm the fitting direction, check the final perimeter, and inspect the surrounding guides.

When preparing a Fit bumper repair, retain the removed bracket, check the final perimeter, and support the bumper evenly. Before final installation, check adjacent panel gaps, confirm the fitting direction, and inspect the surrounding guides.

During comparison with the original support, check the final perimeter, confirm an even seated fit, and review the completed alignment. During receiving inspection, inspect the surrounding guides, confirm the final bumper gap, and clean the mounting area.

Product Technical Specifications

Product type: Front Left Bumper Bracket

Primary OE reference: 71198-SAA-003

Cross-reference numbers: 71198-SAA-003 71198SAA003

Internal item code: HD02007-074

Vehicle brand: HONDA

Vehicle model: Fit

Model year: 2004

Installation position: Front

Side / orientation: Left

Applicable vehicle: HONDA Fit 2004

Wholesale Supply and Packing

For the listed 2004 application, confirm the delivery schedule, include the complete OE number, and inspect the receiving condition. At the workshop preparation stage, confirm separate accessory needs, confirm the packing method, and provide the delivery country.

Before the removed bracket is discarded, confirm the material requirement, review carton edge protection, and confirm the delivery schedule. For a repeat wholesale order, protect projecting locators, compare the supplied photographs, and state the required quantity.

During an OE-led check for HD02007-074, confirm sample requirements, confirm separate accessory needs, and state annual purchasing volume. While reviewing the supplied photographs, state the destination port, state the required quantity, and include the complete OE number.

Frequently Asked Questions

Can a photograph alone confirm 71198-SAA-003 fitment?

A photograph is useful for shape comparison, but the OE number, vehicle application, year, side and mounting geometry should agree before purchase. For Fit, compare the mounting direction, inspect the bracket width, confirm an even seated fit, and confirm the delivery schedule before installation or quotation.

How should 71198-SAA-003 be packed for export?

The bracket should be supported inside the carton, with tabs and projecting locators protected from impact, compression and abrasion. For Fit, inspect the original bracket, compare reinforcement ribs, avoid bending plastic tabs, and check the ordered mounting side before installation or quotation.

Are mounting clips supplied with 71198-SAA-003?

The supply scope follows the pictured product. Reusable clips or separate hardware should be confirmed before the order is finalized. For Fit, compare the removed support, examine the moulded surface, support the bumper evenly, and confirm sample requirements before installation or quotation.

Where is 71198-SAA-003 installed?

The stated installation is the left front bumper area. Opposite-side brackets can use different hole spacing and locator direction. For Fit, compare the complete OE number, check the adjoining gap, protect panel edges, and request supported carton packing before installation or quotation.

How should 71198-SAA-003 be checked before installation?

Compare overall shape, mounting holes, locating tabs, side orientation and the complete OE number with the removed part before tightening any fasteners. For Fit, check nearby lamp openings, inspect the locator direction, transfer reusable clips carefully, and state the required quantity before installation or quotation.

Request a Quote

Send the complete OE reference 71198-SAA-003 , vehicle details, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment note: compare every fixing point; confirm the material specification; compare the removed support before ordering 71198-SAA-003

Product comparison: inspect the back-side structure; check the bumper interface; review nearby cover openings against the removed bracket

Installation note: check lamp-cover clearance; trial-fit without force; check the final perimeter on the Fit

Wholesale enquiry: confirm the material requirement; retain the product label; compare the supplied photographs for HD02007-074