71191-31V-H01 Front Right Fog Light Bezel for HONDA Inspire 2024

71191-31V-H01 Front Right Fog Light Bezel Product Overview

This product page presents 71191-31V-H01 for buyers comparing a front right fog light bezel for HONDA Inspire 2024. Check the right orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Inspire

When separating nearby Inspire variants, match the locating-slot layout, check adjacent bumper parts, and confirm the surface finish. Before packing the confirmed item, review the bezel orientation, compare the original grille section, and check the vehicle build date.

When comparing 71191-31V-H01 with the removed bezel, match the stated trim level, inspect the removed bezel, and confirm the bumper position. For a no-force trial fit, check the vehicle build date, confirm the surface finish, and compare the installation direction.

For the listed 2024 application, confirm the bumper position, confirm the model year, and confirm the surface finish. While checking adjacent body parts, check the nearby lamp opening, compare the full OE marking, and review the bezel orientation.

Front Right Fog Light Bezel Design and Replacement Notes

Before sourcing this front right fog light bezel, compare transferred hardware, measure the original length, and inspect the back-side structure. During receiving inspection, check the lamp interface, review nearby cover openings, and compare mounting-hole height.

Before confirming this fog light bezel, inspect the frame width, inspect the end geometry, and inspect the back-side structure. Before the quotation is confirmed, compare the original edge profile, review narrow bezel ends, and review the outer-edge shape.

For HONDA Inspire 2024, review locator direction, compare vent or grille openings, and inspect the frame width. Before packing the confirmed item, check the lamp interface, compare transferred hardware, and inspect reinforcement ribs.

Application-Specific Identification Notes

Before workshop installation with 71191-31V-H01 on the Inspire 2024: review market-version differences. The HD02008-034 sample for the right side should review the outer-edge shape. For HONDA identification, 71191-31V-H01 also requires technicians to trial-fit the bezel without force. A buyer quoting HD02008-034 should retain the product label for the HONDA Inspire 2024 order.

For application-specific sourcing with 71191-31V-H01 on the Inspire 2024: match the locating-slot layout. The HD02008-034 sample for the right side should inspect the moulded face. For HONDA identification, 71191-31V-H01 also requires technicians to confirm every locator engages. A buyer quoting HD02008-034 should confirm the packing method for the HONDA Inspire 2024 order.

Before workshop installation with 71191-31V-H01 on the Inspire 2024: review market-version differences. The HD02008-034 sample for the right side should review the outer-edge shape. For HONDA identification, 71191-31V-H01 also requires technicians to review separate hardware needs. A buyer quoting HD02008-034 should state the destination port for the HONDA Inspire 2024 order.

For application-specific sourcing with 71191-31V-H01 on the Inspire 2024: verify the mounting side. The HD02008-034 sample for the right side should review narrow bezel ends. For HONDA identification, 71191-31V-H01 also requires technicians to protect nearby painted surfaces. A buyer quoting HD02008-034 should review carton edge protection for the HONDA Inspire 2024 order.

Installation Guidance

When separating nearby Inspire variants, clean the bumper mounting area, check adjacent panel gaps, and protect exposed panel edges. While reviewing the supplied photographs, verify the lamp remains centred, transfer reusable clips carefully, and confirm the fitting direction.

When comparing 71191-31V-H01 with the removed bezel, transfer reusable clips carefully, support the bumper cover evenly, and review the completed alignment. Before final installation, confirm the fitting direction, confirm every locator engages, and trial-fit the bezel without force.

For the listed 2024 application, inspect each screw point, confirm the fitting direction, and protect exposed panel edges. During receiving inspection, review separate hardware needs, check the final perimeter, and confirm an evenly seated fit.

Product Technical Specifications

Product type: Front Right Fog Light Bezel

Primary OE reference: 71191-31V-H01

Cross-reference numbers: 71191-31V-H01 7119131VH01

Internal item code: HD02008-034

Vehicle brand: HONDA

Vehicle model: Inspire

Model year: 2024

Installation position: Front

Side / orientation: Right

Applicable vehicle: HONDA Inspire 2024

Wholesale Supply and Packing

Before sourcing this front right fog light bezel, confirm sample requirements, provide the delivery country, and compare the supplied photographs. At the workshop preparation stage, request supported carton packing, confirm the packing method, and retain the product label.

Before confirming this fog light bezel, state annual purchasing volume, check the ordered mounting side, and compare the supplied photographs. For a repeat wholesale order, confirm separate clip requirements, review carton edge protection, and state the target vehicle.

For HONDA Inspire 2024, state the required quantity, support the bezel during transit, and compare the supplied photographs. While reviewing the supplied photographs, request protective inner wrapping, protect projecting locator tabs, and confirm separate clip requirements.

Frequently Asked Questions

Are mounting clips supplied with 71191-31V-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Inspire, review market-version differences, check the adjoining gap, confirm an evenly seated fit, and provide the delivery country before installation or quotation.

Does 71191-31V-H01 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Inspire, review market-version differences, check the bezel curvature, avoid bending moulded tabs, and check the ordered mounting side before installation or quotation.

How should 71191-31V-H01 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Inspire, review market-version differences, compare mounting-hole height, support the bumper cover evenly, and support the bezel during transit before installation or quotation.

What vehicle application is listed for 71191-31V-H01?

71191-31V-H01 is presented for HONDA Inspire 2024. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Inspire, review market-version differences, inspect reinforcement ribs, review separate hardware needs, and request protective inner wrapping before installation or quotation.

Can photographs alone confirm 71191-31V-H01 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Inspire, review market-version differences, compare the original edge profile, check adjacent panel gaps, and confirm separate clip requirements before installation or quotation.

Request a Quote

Send the complete OE reference 71191-31V-H01 , vehicle details, mounting side, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment reminder: 71191-31V-H01: review market-version differences; HD02008-034: review market-version differences; Inspire 2024: review market-version differences

Component review: 71191-31V-H01: inspect the end geometry; HD02008-034: compare mounting-hole height; Right: compare the original edge profile

Mounting advice: HD02008-034: confirm the fitting direction; 71191-31V-H01: check lamp-to-bezel clearance; Inspire: avoid bending moulded tabs

Supply enquiry: 71191-31V-H01: request supported carton packing; HD02008-034: include the complete OE reference; HONDA Inspire 2024: check the ordered mounting side