71156-T4D-H01 Front Right Fog Light Bezel for HONDA Jade 2017

71156-T4D-H01 Front Right Fog Light Bezel Product Overview

This listing covers 71156-T4D-H01, a front right fog light bezel associated with HONDA Jade 2017. Check the right orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Jade

When comparing 71156-T4D-H01 with the removed bezel, check the vehicle build date, compare the full OE marking, and review facelift styling. Before final installation, confirm the vehicle market, check the nearby lamp opening, and match the locating-slot layout.

For the listed 2017 application, compare the installation direction, match the locating-slot layout, and check adjacent bumper parts. During receiving inspection, confirm the surface finish, review the bezel orientation, and compare the original grille section.

Before the removed bezel is discarded, review market-version differences, compare every fixing tab, and review facelift styling. Before the quotation is confirmed, compare the original grille section, check adjacent bumper parts, and confirm the vehicle market.

Front Right Fog Light Bezel Design and Replacement Notes

Before confirming this fog light bezel, check the bezel curvature, confirm decorative finish details, and check the lamp interface. For a repeat wholesale order, review narrow bezel ends, inspect the end geometry, and inspect the moulded face.

For HONDA Jade 2017, inspect reinforcement ribs, review narrow bezel ends, and check the adjoining gap. While reviewing the supplied photographs, compare transferred hardware, measure the original length, and inspect the back-side structure.

When preparing a Jade bumper repair, check the lamp interface, review locator direction, and check the adjoining gap. Before final installation, confirm decorative finish details, check the bumper transition, and review nearby cover openings.

Application-Specific Identification Notes

For an export quotation with 71156-T4D-H01 on the Jade 2017: check the nearby lamp opening. The HD02008-080 sample for the right side should compare the original edge profile. For HONDA identification, 71156-T4D-H01 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-080 should state the destination port for the HONDA Jade 2017 order.

For application-specific sourcing with 71156-T4D-H01 on the Jade 2017: review the bezel orientation. The HD02008-080 sample for the right side should check the adjoining gap. For HONDA identification, 71156-T4D-H01 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-080 should confirm separate clip requirements for the HONDA Jade 2017 order.

OE selection begins with 71156-T4D-H01 on the Jade 2017: review the bezel orientation. The HD02008-080 sample for the right side should check the lamp interface. For HONDA identification, 71156-T4D-H01 also requires technicians to trial-fit the bezel without force. A buyer quoting HD02008-080 should request protective inner wrapping for the HONDA Jade 2017 order.

A trim-level comparison requires with 71156-T4D-H01 on the Jade 2017: check the nearby lamp opening. The HD02008-080 sample for the right side should measure the original length. For HONDA identification, 71156-T4D-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-080 should request protective inner wrapping for the HONDA Jade 2017 order.

Installation Guidance

When comparing 71156-T4D-H01 with the removed bezel, confirm the fitting direction, inspect each screw point, and check lamp-to-bezel clearance. When checking the bumper opening, retain the removed bezel for comparison, avoid bending moulded tabs, and confirm every locator engages.

For the listed 2017 application, inspect the surrounding guides, align the lamp opening first, and check lamp-to-bezel clearance. At the workshop preparation stage, review the completed alignment, trial-fit the bezel without force, and retain the removed bezel for comparison.

Before the removed bezel is discarded, trial-fit the bezel without force, confirm the finished bumper gap, and review separate hardware needs. For a repeat wholesale order, retain the removed bezel for comparison, inspect damaged mounting points, and clean the bumper mounting area.

Product Technical Specifications

Product type: Front Right Fog Light Bezel

Primary OE reference: 71156-T4D-H01

Cross-reference numbers: 71156-T4D-H01 71156T4DH01

Internal item code: HD02008-080

Vehicle brand: HONDA

Vehicle model: Jade

Model year: 2017

Installation position: Front

Side / orientation: Right

Version / finish: high-specification

Applicable vehicle: HONDA Jade 2017

Wholesale Supply and Packing

Before confirming this fog light bezel, provide the delivery country, confirm the required finish, and support the bezel during transit. Before clips or hardware are transferred, confirm sample requirements, confirm separate clip requirements, and state annual purchasing volume.

For HONDA Jade 2017, support the bezel during transit, confirm the delivery schedule, and state the target vehicle. During the physical comparison, send photographs of the removed part, check the ordered mounting side, and protect projecting locator tabs.

When preparing a Jade bumper repair, confirm separate clip requirements, review carton edge protection, and state the target vehicle. When checking the bumper opening, confirm sample requirements, retain the product label, and inspect receiving condition.

Frequently Asked Questions

Is workshop installation recommended for 71156-T4D-H01?

Yes. A workshop can inspect damaged bumper mounts on the Jade, align the lamp opening and avoid forcing a bezel intended for another trim level. For Jade, compare the full OE marking, inspect the moulded face, confirm the finished bumper gap, and confirm the packing method before installation or quotation.

Are mounting clips supplied with 71156-T4D-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Jade, review the bezel orientation, compare vent or grille openings, inspect the surrounding guides, and request export quotation terms before installation or quotation.

Does 71156-T4D-H01 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Jade, compare every fixing tab, confirm decorative finish details, review the completed alignment, and state annual purchasing volume before installation or quotation.

How should 71156-T4D-H01 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Jade, inspect the lamp aperture size, review the outer-edge shape, confirm an evenly seated fit, and check the ordered mounting side before installation or quotation.

What vehicle application is listed for 71156-T4D-H01?

71156-T4D-H01 is presented for HONDA Jade 2017. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Jade, compare the original grille section, inspect the frame width, check the final perimeter, and compare the supplied photographs before installation or quotation.

Request a Quote

Send the complete OE reference 71156-T4D-H01 , vehicle details, mounting side, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment reminder: 71156-T4D-H01: check the nearby lamp opening; HD02008-080: review the bezel orientation; Jade 2017: inspect the lamp aperture size

Component review: 71156-T4D-H01: review locator direction; HD02008-080: confirm decorative finish details; Right: inspect the frame width

Mounting advice: HD02008-080: trial-fit the bezel without force; 71156-T4D-H01: clean the bumper mounting area; Jade: inspect the surrounding guides

Supply enquiry: 71156-T4D-H01: send photographs of the removed part; HD02008-080: request protective inner wrapping; HONDA Jade 2017: request export quotation terms