71121-TB0-H01 Front Grille for HONDA Accord 2013

71121-TB0-H01 Front Grille Product Overview

71121-TB0-H01 is listed as a front grille for HONDA Accord 2013. This product page records the OE reference, vehicle application, supplied scope and practical fitment information needed for replacement-part sourcing.

Application and Product Function

On HONDA Accord 2013, this front grille is intended to align the cooling-module entrance at the stated position, protect the front-end proportions with model-specific geometry, and preserve the radiator airflow path on the listed application. Its application-shaped frame can also align the radiator airflow path ahead of the radiator, organise the central fascia line for the recorded trim, and complete the mesh opening during collision repair.

Fitment Confirmation

Treat 71121-TB0-H01 as the primary identity for this part. For HONDA Accord 2013, verify suitability by checking the source vehicle and then measure the VIN record with the retained hardware, match the side orientation at the front opening, and confirm the mesh pattern at the front opening. A physical comparison should additionally verify the original sample with vehicle build data, measure the clip direction at the front opening, and confirm the model designation using product photographs.

Installation and Handling

Before removing the original grille, support the reusable hardware in the workshop sequence and transfer the side returns during careful removal. During trial fitting of HD02011-005, seat the radiator fins before final fastening and clean the receiving slots during careful removal. Before the bumper is fully reassembled, transfer the outer corners after the dry fit and recheck the retaining clips under even lighting.

Product Technical Specifications

Product type: Front Grille

Primary OE reference: 71121-TB0-H01

Cross-reference numbers: 71121-TB0-H01 71121TB0H01

Internal item code: HD02011-005

Vehicle brand: HONDA

Vehicle model: Accord

Model year: 2013

Installation position: Front grille / radiator opening

Primary function: Application-specific exterior grille and front air-entry component

Quality Inspection and Protective Packing

Receiving inspection for 71121-TB0-H01 should include inspect the visible finish before sample approval, confirm the approved sample after transport, and review the edge straightness before trim transfer. Before the part is fitted or repacked, the handler should also compare the carton supports for repeat-lot control, measure the protective film with the carton open, and verify the projecting tabs on both visible faces.

Wholesale Supply Information

To quote HD02011-005 accurately, the enquiry should confirm the camera provision with each order line, provide the trim requirement to the sales team, and confirm the finish version before carton approval. For samples, mixed-model cartons or repeat purchasing, please send the consignee details for freight calculation, identify the internal item code for mixed-model orders, and send the required quantity for mixed-model orders.

Frequently Asked Questions

Is a sample order available for 71121-TB0-H01?

Sample and wholesale options can be discussed after the OE number, vehicle application, supplied scope, quantity and destination are confirmed.

Does 71121-TB0-H01 include an emblem or decorative trim?

The supply scope follows the product photographs. Badges, mouldings and separate decorative pieces are included only when pictured or specifically confirmed.

Can 71121-TB0-H01 be installed without removing the bumper?

Access depends on the vehicle. Follow the workshop procedure and avoid forcing retaining tabs; some applications require partial or complete bumper removal.

What is the service role of 71121-TB0-H01?

It restores the specified front grille opening, supports the intended exterior appearance and helps maintain the designed airflow path toward the cooling area.

Does the finish of 71121-TB0-H01 need confirmation?

Yes. Grilles can differ in black, chrome, silver, painted or textured treatments. Compare the photographed finish with the required vehicle specification.

Product function: Front Grille serves as a non-structural exterior component ahead of the cooling module and is shaped for the stated vehicle generation and bumper configuration.

Fitment check: Compare the original grille frame, mounting tabs, mesh pattern and surrounding trim interfaces.

Supply scope: Review the product images for the exact supplied scope and ask about removable trim or emblem pieces before ordering.

Finish note: Match the visible frame treatment and mesh appearance to the required trim level.

Quotation information: Attach original-part photographs with the OE number, quantity and delivery location.