71121-T6P-H01 Front Grille for HONDA Crider 2013

71121-T6P-H01 Front Grille Product Overview

71121-T6P-H01 is listed as a front grille for HONDA Crider 2013. This product page records the OE reference, vehicle application, supplied scope and practical fitment information needed for replacement-part sourcing.

Application and Product Function

On HONDA Crider 2013, this front grille is intended to support the radiator airflow path around adjacent mouldings, re-establish the radiator airflow path ahead of the radiator, and restore the exterior profile during exterior restoration. Its application-shaped frame can also re-establish the emblem area around adjacent mouldings, restore the emblem area at the stated position, and re-establish the emblem area at the stated position.

Fitment Confirmation

Treat 71121-T6P-H01 as the primary identity for this part. For HONDA Crider 2013, verify suitability by checking the source vehicle and then inspect the surface finish on the target bumper, match the OE marking using product photographs, and cross-check the original sample for the stated model year. A physical comparison should additionally confirm the VIN record on the target bumper, review the regional package during a dry comparison, and review the surface finish on the target bumper.

Installation and Handling

Before removing the original grille, clean the reusable hardware in the workshop sequence and protect the lamp-side trim before final fastening. During trial fitting of HD02011-043, transfer the reusable hardware after centre alignment and release the grille frame before the road test. Before the bumper is fully reassembled, recheck the centre points before trim transfer and seat the lamp-side trim before the road test.

Product Technical Specifications

Product type: Front Grille

Primary OE reference: 71121-T6P-H01

Cross-reference numbers: 71121-T6P-H01 71121T6PH01

Internal item code: HD02011-043

Vehicle brand: HONDA

Vehicle model: Crider

Model year: 2013

Installation position: Front grille / radiator opening

Primary function: Application-specific exterior grille and front air-entry component

Quality Inspection and Protective Packing

Receiving inspection for 71121-T6P-H01 should include inspect the edge straightness after transport, inspect the edge straightness on both visible faces, and protect the centre line before trim transfer. Before the part is fitted or repacked, the handler should also review the edge straightness before trim transfer, protect the item label before installation, and measure the camera aperture against the order line.

Wholesale Supply Information

To quote HD02011-043 accurately, the enquiry should state the complete OE number before volume production, list the trim requirement with each order line, and request the destination market with each order line. For samples, mixed-model cartons or repeat purchasing, please send the vehicle details before sample preparation, identify the destination market before carton approval, and send the internal item code before sample preparation.

Frequently Asked Questions

Can 71121-T6P-H01 fit every Crider model year?

No. Facelift, market and trim changes can alter grille shape, finish and mounting points. Use the listed year range and OE reference.

Is a sample order available for 71121-T6P-H01?

Sample and wholesale options can be discussed after the OE number, vehicle application, supplied scope, quantity and destination are confirmed.

Does 71121-T6P-H01 include an emblem or decorative trim?

The supply scope follows the product photographs. Badges, mouldings and separate decorative pieces are included only when pictured or specifically confirmed.

Can 71121-T6P-H01 be installed without removing the bumper?

Access depends on the vehicle. Follow the workshop procedure and avoid forcing retaining tabs; some applications require partial or complete bumper removal.

What is the service role of 71121-T6P-H01?

It restores the specified front grille opening, supports the intended exterior appearance and helps maintain the designed airflow path toward the cooling area.

Product function: Front Grille protects the radiator zone from larger road debris while allowing airflow and provides a secure interface for the correct model-specific grille hardware.

Fitment check: Verify the vehicle model, body version, grille outline and badge or camera provision.

Supply scope: Only the pictured grille components are supplied; confirm badges, brackets and fastening hardware separately.

Finish note: Inspect surface colour and coating under neutral light before transferring decorative parts.

Quotation information: Provide vehicle details, required finish, order quantity and shipping destination.