71107-TBX-H51 Front Left Fog Light Bezel for HONDA Inspire 2022

71107-TBX-H51 Front Left Fog Light Bezel Product Overview

This product page presents 71107-TBX-H51 for buyers comparing a front left fog light bezel for HONDA Inspire 2022. Check the left orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Inspire

For replacement in the left front area, confirm the model year, verify the mounting side, and check the nearby lamp opening. Before clips or hardware are transferred, match the outer contour, review the bezel orientation, and match the locating-slot layout.

When separating nearby Inspire variants, check the nearby lamp opening, compare the full OE marking, and review the bezel orientation. During the physical comparison, compare every fixing tab, inspect the lamp aperture size, and compare the original grille section.

When comparing 71107-TBX-H51 with the removed bezel, review the bezel orientation, confirm the surface finish, and check adjacent bumper parts. When checking the bumper opening, match the locating-slot layout, compare the installation direction, and confirm the vehicle market.

Front Left Fog Light Bezel Design and Replacement Notes

For wholesale selection of 71107-TBX-H51, compare vent or grille openings, compare the surface texture, and compare mounting-hole height. For a no-force trial fit, compare the centre alignment, measure the original length, and inspect the moulded face.

Before sourcing this front left fog light bezel, inspect the end geometry, review locator direction, and compare vent or grille openings. While checking adjacent body parts, inspect the frame width, check the lamp interface, and compare transferred hardware.

Before confirming this fog light bezel, check the adjoining gap, inspect the back-side structure, and compare mounting-hole height. Before clips or hardware are transferred, confirm decorative finish details, compare the original edge profile, and compare the centre alignment.

Application-Specific Identification Notes

OE selection begins with 71107-TBX-H51 on the Inspire 2022: check the nearby lamp opening. The HD02008-029 sample for the left side should compare vent or grille openings. For HONDA identification, 71107-TBX-H51 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-029 should include the complete OE reference for the HONDA Inspire 2022 order.

For application-specific sourcing with 71107-TBX-H51 on the Inspire 2022: review market-version differences. The HD02008-029 sample for the left side should check the adjoining gap. For HONDA identification, 71107-TBX-H51 also requires technicians to review separate hardware needs. A buyer quoting HD02008-029 should request protective inner wrapping for the HONDA Inspire 2022 order.

For an export quotation with 71107-TBX-H51 on the Inspire 2022: review the bezel orientation. The HD02008-029 sample for the left side should compare mounting-hole height. For HONDA identification, 71107-TBX-H51 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-029 should retain the product label for the HONDA Inspire 2022 order.

A vehicle-side comparison starts with 71107-TBX-H51 on the Inspire 2022: compare the installation direction. The HD02008-029 sample for the left side should compare mounting-hole height. For HONDA identification, 71107-TBX-H51 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-029 should state the target vehicle for the HONDA Inspire 2022 order.

Installation Guidance

For replacement in the left front area, avoid bending moulded tabs, align the lamp opening first, and verify the lamp remains centred. Before the quotation is confirmed, check the final perimeter, check lamp-to-bezel clearance, and transfer reusable clips carefully.

When separating nearby Inspire variants, review separate hardware needs, check the final perimeter, and confirm an evenly seated fit. Before packing the confirmed item, review the completed alignment, inspect the surrounding guides, and confirm the finished bumper gap.

When comparing 71107-TBX-H51 with the removed bezel, verify the lamp remains centred, confirm every locator engages, and confirm an evenly seated fit. For a no-force trial fit, align the lamp opening first, confirm the fitting direction, and clean the bumper mounting area.

Product Technical Specifications

Product type: Front Left Fog Light Bezel

Primary OE reference: 71107-TBX-H51

Cross-reference numbers: 71107-TBX-H51 71107TBXH51

Internal item code: HD02008-029

Vehicle brand: HONDA

Vehicle model: Inspire

Model year: 2022

Installation position: Front

Side / orientation: Left

Applicable vehicle: HONDA Inspire 2022

Wholesale Supply and Packing

For wholesale selection of 71107-TBX-H51, state the destination port, confirm the packing method, and request export quotation terms. Before final installation, state annual purchasing volume, check the ordered mounting side, and compare the supplied photographs.

Before sourcing this front left fog light bezel, include the complete OE reference, confirm sample requirements, and request export quotation terms. During receiving inspection, send photographs of the removed part, retain the product label, and state annual purchasing volume.

Before confirming this fog light bezel, retain the product label, confirm the required finish, and request protective inner wrapping. Before the quotation is confirmed, state annual purchasing volume, state the target vehicle, and protect projecting locator tabs.

Frequently Asked Questions

What vehicle application is listed for 71107-TBX-H51?

71107-TBX-H51 is presented for HONDA Inspire 2022. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Inspire, match the outer contour, inspect the moulded face, protect nearby painted surfaces, and confirm the required finish before installation or quotation.

Can photographs alone confirm 71107-TBX-H51 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Inspire, review the bezel orientation, compare the original edge profile, trial-fit the bezel without force, and request supported carton packing before installation or quotation.

Does trim specification matter for 71107-TBX-H51?

Yes. Different equipment grades can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Inspire, match the locating-slot layout, review locator direction, align the lamp opening first, and protect projecting locator tabs before installation or quotation.

How should 71107-TBX-H51 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Inspire, inspect the lamp aperture size, check the bezel curvature, inspect damaged mounting points, and support the bezel during transit before installation or quotation.

What should be inspected when 71107-TBX-H51 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Inspire, match the stated trim level, compare the centre alignment, transfer reusable clips carefully, and inspect receiving condition before installation or quotation.

Request a Quote

Send the complete OE reference 71107-TBX-H51 , vehicle details, mounting side, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Application note: 71107-TBX-H51: check the nearby lamp opening; HD02008-029: review the bezel orientation; Inspire 2022: inspect the lamp aperture size

Bezel inspection: 71107-TBX-H51: confirm decorative finish details; HD02008-029: review locator direction; Left: compare the centre alignment

Replacement guidance: HD02008-029: inspect the surrounding guides; 71107-TBX-H51: clean the bumper mounting area; Inspire: trial-fit the bezel without force

Export request: 71107-TBX-H51: confirm the delivery schedule; HD02008-029: provide the delivery country; HONDA Inspire 2022: request supported carton packing