71107-TB0-H01 Front Right Fog Light Bezel for HONDA Everus G11 2011

71107-TB0-H01 Front Right Fog Light Bezel Product Overview

This product page presents 71107-TB0-H01 for buyers comparing a front right fog light bezel for HONDA Everus G11 2011. Check the right orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Everus G11

When separating nearby Everus G11 variants, compare the full OE marking, check the nearby lamp opening, and confirm the surface finish. Before packing the confirmed item, confirm the model year, confirm the bumper position, and check adjacent bumper parts.

When comparing 71107-TB0-H01 with the removed bezel, compare every fixing tab, review market-version differences, and compare the full OE marking. For a no-force trial fit, compare the installation direction, confirm the surface finish, and check the vehicle build date.

For the listed 2011 application, compare the original grille section, review the bezel orientation, and confirm the surface finish. While checking adjacent body parts, check adjacent bumper parts, match the locating-slot layout, and compare the installation direction.

Front Right Fog Light Bezel Design and Replacement Notes

Before sourcing this front right fog light bezel, compare the surface texture, compare vent or grille openings, and compare transferred hardware. During receiving inspection, check the bezel curvature, review nearby cover openings, and check the bumper transition.

Before confirming this fog light bezel, inspect the back-side structure, measure the original length, and compare transferred hardware. Before the quotation is confirmed, check the adjoining gap, review narrow bezel ends, and inspect reinforcement ribs.

For HONDA Everus G11 2011, confirm decorative finish details, inspect the end geometry, and compare transferred hardware. Before packing the confirmed item, review the outer-edge shape, compare the centre alignment, and check the adjoining gap.

Application-Specific Identification Notes

OE selection begins with 71107-TB0-H01 on the Everus G11 2011: check adjacent bumper parts. The HD02008-088 sample for the right side should check the bezel curvature. For HONDA identification, 71107-TB0-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-088 should confirm separate clip requirements for the HONDA Everus G11 2011 order.

For application-specific sourcing with 71107-TB0-H01 on the Everus G11 2011: check the nearby lamp opening. The HD02008-088 sample for the right side should check the adjoining gap. For HONDA identification, 71107-TB0-H01 also requires technicians to check adjacent panel gaps. A buyer quoting HD02008-088 should request supported carton packing for the HONDA Everus G11 2011 order.

For an export quotation with 71107-TB0-H01 on the Everus G11 2011: review the bezel orientation. The HD02008-088 sample for the right side should measure the original length. For HONDA identification, 71107-TB0-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-088 should state the target vehicle for the HONDA Everus G11 2011 order.

A vehicle-side comparison starts with 71107-TB0-H01 on the Everus G11 2011: review the bezel orientation. The HD02008-088 sample for the right side should inspect reinforcement ribs. For HONDA identification, 71107-TB0-H01 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-088 should retain the product label for the HONDA Everus G11 2011 order.

Installation Guidance

When separating nearby Everus G11 variants, review the completed alignment, review separate hardware needs, and inspect each screw point. While reviewing the supplied photographs, avoid bending moulded tabs, transfer reusable clips carefully, and trial-fit the bezel without force.

When comparing 71107-TB0-H01 with the removed bezel, protect nearby painted surfaces, inspect damaged mounting points, and confirm every locator engages. Before final installation, check lamp-to-bezel clearance, protect exposed panel edges, and confirm an evenly seated fit.

For the listed 2011 application, confirm every locator engages, verify the lamp remains centred, and inspect each screw point. During receiving inspection, trial-fit the bezel without force, check the final perimeter, and check adjacent panel gaps.

Product Technical Specifications

Product type: Front Right Fog Light Bezel

Primary OE reference: 71107-TB0-H01

Cross-reference numbers: 71107-TB0-H01 71107TB0H01

Internal item code: HD02008-088

Vehicle brand: HONDA

Vehicle model: Everus G11

Model year: 2011

Installation position: Front

Side / orientation: Right

Version / finish: high-specification

Applicable vehicle: HONDA Everus G11 2011

Wholesale Supply and Packing

Before sourcing this front right fog light bezel, protect projecting locator tabs, support the bezel during transit, and inspect receiving condition. At the workshop preparation stage, retain the product label, confirm sample requirements, and state the target vehicle.

Before confirming this fog light bezel, review carton edge protection, request protective inner wrapping, and inspect receiving condition. For a repeat wholesale order, request export quotation terms, confirm the required finish, and confirm separate clip requirements.

For HONDA Everus G11 2011, confirm the packing method, check the ordered mounting side, and review carton edge protection. While reviewing the supplied photographs, retain the product label, protect projecting locator tabs, and include the complete OE reference.

Frequently Asked Questions

What details should accompany a 71107-TB0-H01 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Everus G11, confirm the surface finish, inspect the moulded face, check the final perimeter, and confirm sample requirements before installation or quotation.

Why must the left and right versions of 71107-TB0-H01 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Everus G11, review the bezel orientation, review the outer-edge shape, confirm the fitting direction, and support the bezel during transit before installation or quotation.

Is workshop installation recommended for 71107-TB0-H01?

Yes. A workshop can inspect damaged bumper mounts on the Everus G11, align the lamp opening and avoid forcing a bezel intended for another trim level. For Everus G11, compare the original grille section, review nearby cover openings, retain the removed bezel for comparison, and confirm the required finish before installation or quotation.

Are mounting clips supplied with 71107-TB0-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Everus G11, check the vehicle build date, measure the original length, check adjacent panel gaps, and provide the delivery country before installation or quotation.

Does 71107-TB0-H01 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Everus G11, match the outer contour, review narrow bezel ends, align the lamp opening first, and confirm the delivery schedule before installation or quotation.

Request a Quote

Send the complete OE reference 71107-TB0-H01 , vehicle details, mounting side, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Application note: 71107-TB0-H01: check adjacent bumper parts; HD02008-088: review the bezel orientation; Everus G11 2011: check the vehicle build date

Bezel inspection: 71107-TB0-H01: review fastening slots; HD02008-088: review nearby cover openings; Right: review narrow bezel ends

Replacement guidance: HD02008-088: avoid bending moulded tabs; 71107-TB0-H01: clean the bumper mounting area; Everus G11: confirm the fitting direction

Export request: 71107-TB0-H01: protect projecting locator tabs; HD02008-088: state the destination port; HONDA Everus G11 2011: support the bezel during transit