71107-T9J-T00 Front Left Fog Light Bezel for HONDA City 2015

71107-T9J-T00 Front Left Fog Light Bezel Product Overview

The product shown under 71107-T9J-T00 is a front left fog light bezel intended for HONDA City 2015. Check the left orientation, lamp opening, mounting tabs and standard-specification specification against the original component.

Fitment and Application for City

Before confirming this fog light bezel, compare the installation direction, confirm the surface finish, and check the vehicle build date. Before clips or hardware are transferred, confirm the bumper position, inspect the removed bezel, and match the stated trim level.

For HONDA City 2015, review market-version differences, verify the mounting side, and inspect the removed bezel. During the physical comparison, compare every fixing tab, check the nearby lamp opening, and confirm the bumper position.

When preparing a City bumper repair, review facelift styling, confirm the vehicle market, and check the nearby lamp opening. When checking the bumper opening, match the locating-slot layout, inspect the removed bezel, and confirm the surface finish.

Front Left Fog Light Bezel Design and Replacement Notes

When comparing 71107-T9J-T00 with the removed bezel, review the outer-edge shape, inspect the frame width, and compare mounting-hole height. For a no-force trial fit, review nearby cover openings, check the lamp interface, and inspect the back-side structure.

For the listed 2015 application, check the bezel curvature, review narrow bezel ends, and compare mounting-hole height. While checking adjacent body parts, review locator direction, inspect reinforcement ribs, and review nearby cover openings.

Before the removed bezel is discarded, inspect reinforcement ribs, compare the centre alignment, and compare vent or grille openings. Before clips or hardware are transferred, review nearby cover openings, check the adjoining gap, and review fastening slots.

Application-Specific Identification Notes

For an export quotation with 71107-T9J-T00 on the City 2015: check adjacent bumper parts. The HD02008-115 sample for the left side should inspect reinforcement ribs. For HONDA identification, 71107-T9J-T00 also requires technicians to confirm the fitting direction. A buyer quoting HD02008-115 should request export quotation terms for the HONDA City 2015 order.

For application-specific sourcing with 71107-T9J-T00 on the City 2015: compare the installation direction. The HD02008-115 sample for the left side should check the adjoining gap. For HONDA identification, 71107-T9J-T00 also requires technicians to confirm an evenly seated fit. A buyer quoting HD02008-115 should include the complete OE reference for the HONDA City 2015 order.

OE selection begins with 71107-T9J-T00 on the City 2015: review the bezel orientation. The HD02008-115 sample for the left side should check the bumper transition. For HONDA identification, 71107-T9J-T00 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-115 should include the complete OE reference for the HONDA City 2015 order.

A trim-level comparison requires with 71107-T9J-T00 on the City 2015: review market-version differences. The HD02008-115 sample for the left side should review the outer-edge shape. For HONDA identification, 71107-T9J-T00 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-115 should request export quotation terms for the HONDA City 2015 order.

Installation Guidance

Before confirming this fog light bezel, check adjacent panel gaps, retain the removed bezel for comparison, and confirm the fitting direction. Before the quotation is confirmed, check the final perimeter, inspect the surrounding guides, and clean the bumper mounting area.

For HONDA City 2015, confirm the fitting direction, align the lamp opening first, and confirm an evenly seated fit. Before packing the confirmed item, confirm every locator engages, verify the lamp remains centred, and inspect each screw point.

When preparing a City bumper repair, inspect the surrounding guides, review the completed alignment, and confirm an evenly seated fit. For a no-force trial fit, check the final perimeter, review separate hardware needs, and protect exposed panel edges.

Product Technical Specifications

Product type: Front Left Fog Light Bezel

Primary OE reference: 71107-T9J-T00

Cross-reference numbers: 71107-T9J-T00 71107T9JT00

Internal item code: HD02008-115

Vehicle brand: HONDA

Vehicle model: City

Model year: 2015

Installation position: Front

Side / orientation: Left

Version / finish: standard-specification

Applicable vehicle: HONDA City 2015

Wholesale Supply and Packing

When comparing 71107-T9J-T00 with the removed bezel, request export quotation terms, confirm the required finish, and confirm separate clip requirements. Before final installation, state the required quantity, retain the product label, and confirm the packing method.

For the listed 2015 application, provide the delivery country, confirm the delivery schedule, and request export quotation terms. During receiving inspection, compare the supplied photographs, state the target vehicle, and inspect receiving condition.

Before the removed bezel is discarded, support the bezel during transit, confirm sample requirements, and confirm separate clip requirements. Before the quotation is confirmed, state annual purchasing volume, state the destination port, and state the required quantity.

Frequently Asked Questions

Does 71107-T9J-T00 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For City, verify the mounting side, inspect the moulded face, align the lamp opening first, and inspect receiving condition before installation or quotation.

How should 71107-T9J-T00 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For City, review the bezel orientation, measure the original length, confirm an evenly seated fit, and request protective inner wrapping before installation or quotation.

What vehicle application is listed for 71107-T9J-T00?

71107-T9J-T00 is presented for HONDA City 2015. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For City, match the stated trim level, compare the centre alignment, confirm every locator engages, and review carton edge protection before installation or quotation.

Can photographs alone confirm 71107-T9J-T00 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For City, check the vehicle build date, compare mounting-hole height, verify the lamp remains centred, and include the complete OE reference before installation or quotation.

Does trim specification matter for 71107-T9J-T00?

Yes. standard-specification can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For City, compare the full OE marking, compare the surface texture, inspect each screw point, and state annual purchasing volume before installation or quotation.

Request a Quote

Send the complete OE reference 71107-T9J-T00 , vehicle details, mounting side, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment note: 71107-T9J-T00: check adjacent bumper parts; HD02008-115: review the bezel orientation; City 2015: check the vehicle build date

Product comparison: 71107-T9J-T00: inspect the frame width; HD02008-115: compare the centre alignment; Left: compare the surface texture

Installation note: HD02008-115: inspect damaged mounting points; 71107-T9J-T00: clean the bumper mounting area; City: confirm an evenly seated fit

Wholesale enquiry: 71107-T9J-T00: confirm the packing method; HD02008-115: confirm separate clip requirements; HONDA City 2015: request protective inner wrapping