71107-T4N-H71 Front Right Fog Light Bezel for HONDA Jade 2017

71107-T4N-H71 Front Right Fog Light Bezel Product Overview

This product page presents 71107-T4N-H71 for buyers comparing a front right fog light bezel for HONDA Jade 2017. Check the right orientation, lamp opening, mounting tabs and standard-specification specification against the original component.

Fitment and Application for Jade

During comparison with the original lamp surround, match the outer contour, check the vehicle build date, and compare the original grille section. At the workshop preparation stage, review the bezel orientation, confirm the surface finish, and check adjacent bumper parts.

For replacement in the right front area, match the locating-slot layout, inspect the removed bezel, and confirm the surface finish. For a repeat wholesale order, review market-version differences, compare the original grille section, and confirm the model year.

When separating nearby Jade variants, match the stated trim level, confirm the model year, and compare the full OE marking. While reviewing the supplied photographs, inspect the lamp aperture size, confirm the vehicle market, and compare the installation direction.

Front Right Fog Light Bezel Design and Replacement Notes

During an OE-led review for HD02008-076, compare the centre alignment, check the adjoining gap, and inspect the frame width. During the physical comparison, check the bezel curvature, review narrow bezel ends, and compare mounting-hole height.

For wholesale selection of 71107-T4N-H71, review narrow bezel ends, inspect the end geometry, and inspect the moulded face. When checking the bumper opening, compare mounting-hole height, compare transferred hardware, and check the bumper transition.

Before sourcing this front right fog light bezel, review nearby cover openings, compare mounting-hole height, and inspect the frame width. At the workshop preparation stage, review the outer-edge shape, confirm decorative finish details, and compare vent or grille openings.

Application-Specific Identification Notes

A vehicle-side comparison starts with 71107-T4N-H71 on the Jade 2017: review market-version differences. The HD02008-076 sample for the right side should check the adjoining gap. For HONDA identification, 71107-T4N-H71 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-076 should state the target vehicle for the HONDA Jade 2017 order.

For application-specific sourcing with 71107-T4N-H71 on the Jade 2017: compare every fixing tab. The HD02008-076 sample for the right side should inspect the moulded face. For HONDA identification, 71107-T4N-H71 also requires technicians to protect nearby painted surfaces. A buyer quoting HD02008-076 should protect projecting locator tabs for the HONDA Jade 2017 order.

A trim-level comparison requires with 71107-T4N-H71 on the Jade 2017: review market-version differences. The HD02008-076 sample for the right side should inspect the end geometry. For HONDA identification, 71107-T4N-H71 also requires technicians to confirm an evenly seated fit. A buyer quoting HD02008-076 should check the ordered mounting side for the HONDA Jade 2017 order.

Before workshop installation with 71107-T4N-H71 on the Jade 2017: confirm the surface finish. The HD02008-076 sample for the right side should compare the centre alignment. For HONDA identification, 71107-T4N-H71 also requires technicians to inspect each screw point. A buyer quoting HD02008-076 should state annual purchasing volume for the HONDA Jade 2017 order.

Installation Guidance

During comparison with the original lamp surround, protect exposed panel edges, inspect damaged mounting points, and review the completed alignment. While checking adjacent body parts, avoid bending moulded tabs, clean the bumper mounting area, and confirm the fitting direction.

For replacement in the right front area, confirm the finished bumper gap, inspect the surrounding guides, and review the completed alignment. Before clips or hardware are transferred, confirm an evenly seated fit, check the final perimeter, and review separate hardware needs.

When separating nearby Jade variants, align the lamp opening first, check lamp-to-bezel clearance, and review the completed alignment. During the physical comparison, trial-fit the bezel without force, retain the removed bezel for comparison, and confirm an evenly seated fit.

Product Technical Specifications

Product type: Front Right Fog Light Bezel

Primary OE reference: 71107-T4N-H71

Cross-reference numbers: 71107-T4N-H71 71107T4NH71

Internal item code: HD02008-076

Vehicle brand: HONDA

Vehicle model: Jade

Model year: 2017

Installation position: Front

Side / orientation: Right

Version / finish: standard-specification

Applicable vehicle: HONDA Jade 2017

Wholesale Supply and Packing

During an OE-led review for HD02008-076, send photographs of the removed part, request protective inner wrapping, and confirm the packing method. Before packing the confirmed item, check the ordered mounting side, review carton edge protection, and retain the product label.

For wholesale selection of 71107-T4N-H71, inspect receiving condition, state the target vehicle, and compare the supplied photographs. For a no-force trial fit, request export quotation terms, confirm the delivery schedule, and provide the delivery country.

Before sourcing this front right fog light bezel, compare the supplied photographs, request supported carton packing, and confirm the packing method. While checking adjacent body parts, retain the product label, state the required quantity, and confirm separate clip requirements.

Frequently Asked Questions

How should 71107-T4N-H71 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Jade, review the bezel orientation, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

What should be inspected when 71107-T4N-H71 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Jade, review market-version differences, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

Where is 71107-T4N-H71 installed?

The listed front right fog light bezel belongs in the right front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Jade, review the bezel orientation, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

What details should accompany a 71107-T4N-H71 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Jade, review market-version differences, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

Why must the left and right versions of 71107-T4N-H71 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Jade, review the bezel orientation, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

Request a Quote

Send the complete OE reference 71107-T4N-H71 , vehicle details, mounting side, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment note: 71107-T4N-H71: review market-version differences; HD02008-076: review market-version differences; Jade 2017: review market-version differences

Product comparison: 71107-T4N-H71: check the adjoining gap; HD02008-076: check the adjoining gap; Right: check the adjoining gap

Installation note: HD02008-076: check lamp-to-bezel clearance; 71107-T4N-H71: check lamp-to-bezel clearance; Jade: check lamp-to-bezel clearance

Wholesale enquiry: 71107-T4N-H71: state the target vehicle; HD02008-076: state the target vehicle; HONDA Jade 2017: state the target vehicle