71103-T6L-H01 Front Right Fog Light Bezel for HONDA Spirior 2015

71103-T6L-H01 Front Right Fog Light Bezel Product Overview

This listing covers 71103-T6L-H01, a front right fog light bezel associated with HONDA Spirior 2015. Check the right orientation, lamp opening, mounting tabs and standard-specification specification against the original component.

Fitment and Application for Spirior

For HONDA Spirior 2015, compare the original grille section, check the vehicle build date, and match the outer contour. Before packing the confirmed item, review facelift styling, confirm the bumper position, and check the nearby lamp opening.

When preparing a Spirior bumper repair, confirm the vehicle market, confirm the model year, and verify the mounting side. For a no-force trial fit, check the nearby lamp opening, match the outer contour, and review the bezel orientation.

During comparison with the original lamp surround, verify the mounting side, compare the installation direction, and match the outer contour. While checking adjacent body parts, review market-version differences, match the locating-slot layout, and review facelift styling.

Front Right Fog Light Bezel Design and Replacement Notes

For the listed 2015 application, compare the surface texture, inspect reinforcement ribs, and review narrow bezel ends. During receiving inspection, check the adjoining gap, compare transferred hardware, and measure the original length.

Before the removed bezel is discarded, inspect the back-side structure, compare the original edge profile, and review narrow bezel ends. Before the quotation is confirmed, review the outer-edge shape, review fastening slots, and check the lamp interface.

During an OE-led review for HD02008-046, confirm decorative finish details, compare mounting-hole height, and inspect the back-side structure. Before packing the confirmed item, check the adjoining gap, compare the surface texture, and inspect the end geometry.

Application-Specific Identification Notes

For application-specific sourcing with 71103-T6L-H01 on the Spirior 2015: inspect the lamp aperture size. The HD02008-046 sample for the right side should check the bumper transition. For HONDA identification, 71103-T6L-H01 also requires technicians to review separate hardware needs. A buyer quoting HD02008-046 should provide the delivery country for the HONDA Spirior 2015 order.

For application-specific sourcing with 71103-T6L-H01 on the Spirior 2015: verify the mounting side. The HD02008-046 sample for the right side should inspect the moulded face. For HONDA identification, 71103-T6L-H01 also requires technicians to retain the removed bezel for comparison. A buyer quoting HD02008-046 should state the required quantity for the HONDA Spirior 2015 order.

For application-specific sourcing with 71103-T6L-H01 on the Spirior 2015: review market-version differences. The HD02008-046 sample for the right side should inspect reinforcement ribs. For HONDA identification, 71103-T6L-H01 also requires technicians to check adjacent panel gaps. A buyer quoting HD02008-046 should confirm separate clip requirements for the HONDA Spirior 2015 order.

For application-specific sourcing with 71103-T6L-H01 on the Spirior 2015: match the locating-slot layout. The HD02008-046 sample for the right side should compare transferred hardware. For HONDA identification, 71103-T6L-H01 also requires technicians to transfer reusable clips carefully. A buyer quoting HD02008-046 should confirm the packing method for the HONDA Spirior 2015 order.

Installation Guidance

For HONDA Spirior 2015, review the completed alignment, trial-fit the bezel without force, and retain the removed bezel for comparison. While reviewing the supplied photographs, confirm an evenly seated fit, protect nearby painted surfaces, and avoid bending moulded tabs.

When preparing a Spirior bumper repair, protect nearby painted surfaces, inspect the surrounding guides, and protect exposed panel edges. Before final installation, avoid bending moulded tabs, align the lamp opening first, and verify the lamp remains centred.

During comparison with the original lamp surround, confirm every locator engages, avoid bending moulded tabs, and retain the removed bezel for comparison. During receiving inspection, check lamp-to-bezel clearance, inspect each screw point, and confirm the fitting direction.

Product Technical Specifications

Product type: Front Right Fog Light Bezel

Primary OE reference: 71103-T6L-H01

Cross-reference numbers: 71103-T6L-H01 71103T6LH01

Internal item code: HD02008-046

Vehicle brand: HONDA

Vehicle model: Spirior

Model year: 2015

Installation position: Front

Side / orientation: Right

Version / finish: standard-specification

Applicable vehicle: HONDA Spirior 2015

Wholesale Supply and Packing

For the listed 2015 application, protect projecting locator tabs, state the destination port, and confirm sample requirements. At the workshop preparation stage, provide the delivery country, compare the supplied photographs, and request supported carton packing.

Before the removed bezel is discarded, review carton edge protection, state the target vehicle, and confirm sample requirements. For a repeat wholesale order, retain the product label, inspect receiving condition, and support the bezel during transit.

During an OE-led review for HD02008-046, confirm the packing method, include the complete OE reference, and confirm sample requirements. While reviewing the supplied photographs, request export quotation terms, send photographs of the removed part, and retain the product label.

Frequently Asked Questions

How should 71103-T6L-H01 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Spirior, check the vehicle build date, check the adjoining gap, inspect the surrounding guides, and request supported carton packing before installation or quotation.

What vehicle application is listed for 71103-T6L-H01?

71103-T6L-H01 is presented for HONDA Spirior 2015. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Spirior, review market-version differences, check the lamp interface, support the bumper cover evenly, and retain the product label before installation or quotation.

Can photographs alone confirm 71103-T6L-H01 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Spirior, check adjacent bumper parts, review the outer-edge shape, inspect damaged mounting points, and confirm separate clip requirements before installation or quotation.

Does trim specification matter for 71103-T6L-H01?

Yes. standard-specification can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Spirior, check the nearby lamp opening, compare the original edge profile, avoid bending moulded tabs, and request export quotation terms before installation or quotation.

How should 71103-T6L-H01 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Spirior, inspect the lamp aperture size, inspect the end geometry, confirm the fitting direction, and request protective inner wrapping before installation or quotation.

Request a Quote

Send the complete OE reference 71103-T6L-H01 , vehicle details, mounting side, quantity and destination. AutoParts can review the application before preparing a product-specific export quotation.

Application note: 71103-T6L-H01: inspect the lamp aperture size; HD02008-046: review market-version differences; Spirior 2015: check the nearby lamp opening

Bezel inspection: 71103-T6L-H01: check the bezel curvature; HD02008-046: review the outer-edge shape; Right: inspect the end geometry

Replacement guidance: HD02008-046: verify the lamp remains centred; 71103-T6L-H01: check lamp-to-bezel clearance; Spirior: support the bumper cover evenly

Export request: 71103-T6L-H01: include the complete OE reference; HD02008-046: check the ordered mounting side; HONDA Spirior 2015: retain the product label