7077161 Blower Motor for FIAT Uno

7077161 Automotive Blower Motor Overview

Reference 7077161 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6219-004, the 7077161 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6219-004 when comparing this 7077161 airflow configuration.

OE Reference and Application

The primary catalogue number is 7077161 . The recorded application is FIAT Uno. For 6219-004, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6219-004 with the approved OE reference.

HVAC Interface and 7077161 installation

During work on 6219-004, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6219-004 before the lower trim is closed.

For item 6219-004, confirm that the 7077161 centrifugal wheel clears its housing and that the 6219-004 connector lock engages without force. After seating 6219-004, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-004.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 7077161

Cross-reference numbers: 2R2819015 / DI676266 / RC530109 / 9130451074

Vehicle brand: FIAT

Vehicle model: Uno

Model year: Confirm by OE reference

7077161 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6219-004, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6219-004 record remains the picking reference.

For trade item 6219-004, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6219-004 on the packing instruction.

Frequently Asked Questions

How should item 6219-004 and blower number 7077161 be verified?

Match 6219-004 to the complete 7077161 marking, then compare the 6219-004 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.

Can 6219-004 have more than one vehicle-side blower configuration?

Yes. FIAT production changes can affect 6219-004; confirm steering position, climate-control specification and the original 6219-004 geometry before approval.

What circuit checks are useful when 6219-004 does not operate?

For 6219-004, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-004 motor again.

Which details should accompany a wholesale request for 6219-004?

Provide item 6219-004, OE 7077161, the stated application, quantity and destination; add 6219-004 carton or private-label requirements separately.

How can noise be avoided after fitting 6219-004?

Clear debris from the air inlet, check that the 6219-004 wheel turns freely, seat the 6219-004 flange evenly and keep wiring away from the impeller.

Request a quote for 6219-004: Send 7077161, the 6219-004 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country