700258 Blower Motor for HYUNDAI

700258 Automotive Blower Motor Overview

This page records the pictured HVAC blower motor under OE reference 700258 for application-led sourcing.

For catalogue item 6202-062, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6202-062 when comparing this 700258 airflow configuration.

OE Reference and Application

The primary catalogue number is 700258 . The recorded application is HYUNDAI. For 6202-062, Measure the 700258 wheel height and outer diameter, then compare the electrical socket and base contour with the 700258 product photos. Record 6202-062 with the approved OE reference.

HVAC Interface and 700258 installation

During work on 6202-062, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 700258 installation. Recheck 6202-062 before the lower trim is closed.

For item 6202-062, confirm that the 700258 centrifugal wheel clears its housing and that the 6202-062 connector lock engages without force. After seating 6202-062, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-062.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 700258

Cross-reference numbers: 97113D5000

Vehicle brand: HYUNDAI

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

700258 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6202-062, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6202-062 record remains the picking reference.

For trade item 6202-062, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6202-062 on the packing instruction.

Frequently Asked Questions

How should item 6202-062 and blower number 700258 be verified?

Match 6202-062 to the complete 700258 marking, then compare the 6202-062 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.

Can 6202-062 have more than one vehicle-side blower configuration?

Yes. HYUNDAI production changes can affect 6202-062; confirm steering position, climate-control specification and the original 6202-062 geometry before approval.

What circuit checks are useful when 6202-062 does not operate?

For 6202-062, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-062 motor again.

Which details should accompany a wholesale request for 6202-062?

Provide item 6202-062, OE 700258, the stated application, quantity and destination; add 6202-062 carton or private-label requirements separately.

How can noise be avoided after fitting 6202-062?

Clear debris from the air inlet, check that the 6202-062 wheel turns freely, seat the 6202-062 flange evenly and keep wiring away from the impeller.

Request a quote for 6202-062: Send 700258, the 6202-062 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country