700019 Blower Motor for FORD Explorer Sport Trac

700019 Automotive Blower Motor Overview

Reference 700019 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6203-152, the 700019 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6203-152 when comparing this 700019 airflow configuration.

OE Reference and Application

The primary catalogue number is 700019 . The recorded application is FORD Explorer Sport Trac. For 6203-152, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6203-152 with the approved OE reference.

HVAC Interface and 700019 installation

During work on 6203-152, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6203-152 before the lower trim is closed.

For item 6203-152, confirm that the 700019 centrifugal wheel clears its housing and that the 6203-152 connector lock engages without force. After seating 6203-152, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-152.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 700019

Cross-reference numbers: 700019

Vehicle brand: FORD

Vehicle model: Explorer Sport Trac

Model year: Confirm by OE reference

700019 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-152, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-152 record remains the picking reference.

For trade item 6203-152, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-152 on the packing instruction.

Frequently Asked Questions

How should item 6203-152 and blower number 700019 be verified?

Match 6203-152 to the complete 700019 marking, then compare the 6203-152 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-152 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-152; confirm steering position, climate-control specification and the original 6203-152 geometry before approval.

What circuit checks are useful when 6203-152 does not operate?

For 6203-152, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-152 motor again.

Which details should accompany a wholesale request for 6203-152?

Provide item 6203-152, OE 700019, the stated application, quantity and destination; add 6203-152 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-152?

Clear debris from the air inlet, check that the 6203-152 wheel turns freely, seat the 6203-152 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-152: Send 700019, the 6203-152 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country