6R1819015 Blower Motor for AUDI A1 2011-2017

6R1819015 Automotive Blower Motor Overview

This listing links 6R1819015 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6233-006, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6233-006 when comparing this 6R1819015 airflow configuration.

OE Reference and Application

The primary catalogue number is 6R1819015 . The recorded application is AUDI A1 2011-2017. For 6233-006, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6233-006 with the approved OE reference.

HVAC Interface and 6R1819015 installation

During work on 6233-006, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 6R1819015 installation. Recheck 6233-006 before the lower trim is closed.

For item 6233-006, confirm that the 6R1819015 centrifugal wheel clears its housing and that the 6233-006 connector lock engages without force. After seating 6233-006, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-006.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 6R1819015

Cross-reference numbers: 6R1819015

Vehicle brand: AUDI

Vehicle model: A1

Model year: 2011-2017

6R1819015 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6233-006, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6233-006 record remains the picking reference.

For trade item 6233-006, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6233-006 on the packing instruction.

Frequently Asked Questions

How should item 6233-006 and blower number 6R1819015 be verified?

Match 6233-006 to the complete 6R1819015 marking, then compare the 6233-006 plug, terminal count, mounting flange and wheel dimensions with the removed AUDI unit.

Can 6233-006 have more than one vehicle-side blower configuration?

Yes. AUDI production changes can affect 6233-006; confirm steering position, climate-control specification and the original 6233-006 geometry before approval.

What circuit checks are useful when 6233-006 does not operate?

For 6233-006, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-006 motor again.

Which details should accompany a wholesale request for 6233-006?

Provide item 6233-006, OE 6R1819015, the stated application, quantity and destination; add 6233-006 carton or private-label requirements separately.

How can noise be avoided after fitting 6233-006?

Clear debris from the air inlet, check that the 6233-006 wheel turns freely, seat the 6233-006 flange evenly and keep wiring away from the impeller.

Request a quote for 6233-006: Send 6R1819015, the 6233-006 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country