6M51-F43404-AB Trunk Lid Exterior Handle for 2005 Ford Focus Sedan

Trunk Lid Exterior Handle Application

This listing connects 6M51-F43404-AB with a trunk lid exterior handle used on 2005 FORD Focus. Because the part belongs at the rear trunk-lid exterior release recess, mirrored or adjacent-door versions must remain separate.

Visible Profile and Component Identity

The image set records wide recessed finger pocket with switch lead and a black recessed handle housing. Buyers can use those two characteristics to screen stock before checking the mounting face.

Product-Specific Selection Notes

This trunk component is handled differently from a side-door pull. The broad finger recess must remain centred in the rear aperture while its switch wiring clears the latch. Inspect both flange ends for distortion, since a twisted housing can create a visible gap along the boot lid.

For 6M51-F43404-AB, protect the visible black recessed handle housing during bench preparation. Avoid solvents that attack moulded plastic, and do not apply paint or adhesive to the lever pivot, switch membrane or retaining clips.

Before refitting trim, connect FD02037-008 temporarily and confirm the release signal, connector lock and cable routing. A failed tailgate release is often caused by a loose plug or trapped lead rather than the exterior handle shell.

If the release remains inactive after FD02037-008 is connected, test vehicle-side voltage, ground continuity and latch operation before replacing 6M51-F43404-AB again. This separates a switch fault from damaged wiring or a seized trunk latch.

For bulk packing, place FD02037-008 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark rear trunk-lid exterior release recess on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.

Vehicle and Position Confirmation

Measure the trunk opening, connector type and perimeter flange against the removed unit. For 6M51-F43404-AB, confirm 2005 production timing and the rear trunk-lid exterior release recess designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.

Automotive Replacement Part Specifications

Product type: Trunk Lid Exterior Handle

Primary OE reference: 6M51-F43404-AB

Internal item code: FD02037-008

Vehicle brand: FORD

Model: Focus

Vehicle year: 2005

Applicable vehicle: 2005 FORD Focus

Installation position: Rear trunk-lid exterior release recess

Surface appearance: Black recessed handle housing

Cross-reference numbers: 6M51-F43404-AB

Installation and Functional Check

Seat the housing evenly in the deck-lid aperture and confirm the switch operates before refitting inner trim. Once 6M51-F43404-AB is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.

Receiving and Trade Supply

A trade enquiry for FD02037-008 should state 6M51-F43404-AB, 2005 FORD Focus, rear trunk-lid exterior release recess, the required finish and order quantity. Receiving staff can identify this exact line by comparing wide recessed finger pocket with switch lead with the delivered item.

Frequently Asked Questions

How is 6M51-F43404-AB classified?

It is classified as a trunk lid exterior handle for 2005 FORD Focus, positioned at the rear trunk-lid exterior release recess.

Which surface and shape details are relevant?

Review black recessed handle housing together with wide recessed finger pocket with switch lead.

What prevents a left/right ordering error?

State the side in writing and compare the rear linkage direction before approving the order.

What should the workshop inspect after assembly?

Check latch response, lever travel, return alignment and clearance from adjacent trim.

What identifies this item to the supplier?

Quote primary OE 6M51-F43404-AB, SKU FD02037-008, vehicle data, location, finish and requested volume.

Visible identification: Wide recessed finger pocket with switch lead

Mounting review: Compare the pivot, clips, linkage or electrical connector shown in the saved product images.

Order information: Quote 6M51-F43404-AB, SKU FD02037-008, rear trunk-lid exterior release recess and required quantity.

Wholesale note: State destination, packaging preference and whether matching left/right components are required.