68425775AC Active Grille Shutter Assembly for CHRYSLER Wagoneer 2022-2023

68425775AC Active Grille Shutter Assembly Product Overview

68425775AC is listed as a active grille shutter assembly for CHRYSLER Wagoneer 2022-2023. It restores the listed grille-shutter position after impact or mechanical damage. Controls the front thermal-management opening inside the OE-style mounting envelope so the front air path is not left permanently open.

Active Airflow Function

Regulates the movable louver frame without changing the cooling module so cooling demand and closed-grille operation can be balanced. Controls the front thermal-management opening at the recorded front-end position so the front air path is not left permanently open. Guides the active vane assembly inside the OE-style mounting envelope so cooling demand and closed-grille operation can be balanced. The recorded installation point for CHR02013-001 is the front radiator air inlet.

OE and Vehicle Fitment

Measure the rear support ribs against the removed shutter before the part enters installation work. Compare the vane count with the bumper opening identified to confirm the correct supplied scope. Match the rear support ribs against the removed shutter before reusable hardware is transferred. Treat 68425775AC as the primary purchasing identity and use the production date when applications overlap.

Installation and Handling

Protect the vehicle-side connector with the battery procedure observed so the vanes can travel freely. Recheck the bumper-cover edge before final fasteners are tightened before an operational check is performed. Seat the actuator linkage before final fasteners are tightened to prevent connector or wiring damage. After mounting, follow the vehicle’s service procedure for connector and shutter-operation checks.

Product Technical Specifications

Product type: Active Grille Shutter Assembly

Primary OE reference: 68425775AC

Cross-reference numbers: 68425775AC

Internal item code: CHR02013-001

Vehicle brand: CHRYSLER

Vehicle model: Wagoneer

Model year: 2022-2023

Installation position: Front radiator air inlet

System role: Vehicle-specific active airflow component ahead of the radiator

Electrical content: Confirm actuator, connector and wiring scope from the product photographs

Quality Inspection and Protective Packing

Examine the carton-supported corners before the assembly is energised to identify transit distortion. Review the actuator housing before the assembly is energised to identify transit distortion. Examine the pivot points against the approved reference sample so connector damage is found early. Any assembly with warped frames, damaged pivots or connector defects should be isolated before fitting.

Wholesale Supply Information

Identify the required quantity when mixed-model stock is required so the supplied electrical content is clear. Attach the model and production year on the wholesale enquiry so lead time can be reviewed correctly. Confirm the full OE reference on the wholesale enquiry before freight options are compared. Quote requests for CHR02013-001 should include the destination and purchase quantity.

Frequently Asked Questions

What information is needed to quote 68425775AC?

Send the OE reference, engine, quantity and destination for an accurate export quotation. Original-part and connector photographs can help when more than one application exists.

What is the operating role of 68425775AC?

Coordinates the airflow window ahead of the radiator inside the OE-style mounting envelope so cooling demand and closed-grille operation can be balanced. The vehicle control system determines when the shutter opens or closes.

Where is 68425775AC installed?

This component is recorded for the front radiator air inlet on CHRYSLER Wagoneer 2022-2023. Compare the original frame position before ordering.

How should 68425775AC be handled during installation?

Support the vane pivots with the battery procedure observed while maintaining even frame clearance. Do not energise or force the vanes outside the vehicle service procedure.

Why should the connector be checked on 68425775AC?

Connector position and pin arrangement may vary with the actuator and powertrain. A physical comparison helps avoid electrical incompatibility.

Operating role: Manages the movable louver frame around the specified engine application while maintaining a model-specific mounting relationship.

Fitment confirmation: Inspect the mounting face and connector orientation rather than relying only on the front image.

Supply scope: Only the illustrated assembly is included unless additional mounting parts are agreed in writing.

Ordering information: State sample, carton-marking and delivery requirements together with the required quantity.