AutoParts
6811734000 Blower Motor for KIA
Blower Motor — 6811734000. KIA. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 6811734000
- Supplier SKU
- 6201-030
- Vehicle application
- KIA
- Part type
- Blower Motor
Key references
- OE reference
- 6811734000
- Supplier SKU
- 6201-030
- Vehicle application
- KIA
- Part type
- Blower Motor
Product specifications
| OE reference | 6811734000 |
|---|---|
| Supplier SKU | 6201-030 |
| Vehicle application | KIA |
| Vehicle make | KIA |
| Vehicle model | Confirm by OE reference |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 00S3B2401 / F00S3B2401 / 680784 / 10120113 / 5612634 |
Product details
6811734000 Automotive Blower Motor Overview
AutoParts catalogues 6811734000 as an HVAC 6811734000 airflow component for workshops, distributors and export buyers.
For catalogue item 6201-030, When the climate-control circuit commands 6811734000 airflow, the electric motor rotates the 6811734000 fan wheel inside the HVAC housing. Use 6201-030 when comparing this 6811734000 airflow configuration.
OE Reference and Application
The primary catalogue number is 6811734000 . The recorded application is KIA. For 6201-030, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed KIA unit. Record 6201-030 with the approved OE reference.
HVAC Interface and 6811734000 installation
During work on 6201-030, If 6811734000 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 6811734000 motor is the only cause. Recheck 6201-030 before the lower trim is closed.
For item 6201-030, confirm that the 6811734000 centrifugal wheel clears its housing and that the 6201-030 connector lock engages without force. After seating 6201-030, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-030.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 6811734000
Cross-reference numbers: 00S3B2401 / F00S3B2401 / 680784 / 10120113 / 5612634
Vehicle brand: KIA
Vehicle model: Confirm by OE reference
Model year: Confirm by OE reference
6811734000 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6201-030, Packing preparation accounts for the 6811734000 motor weight and wheel shape to reduce movement inside the carton. The 6201-030 record remains the picking reference.
For trade item 6201-030, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6201-030 on the packing instruction.
Frequently Asked Questions
How should item 6201-030 and blower number 6811734000 be verified?
Match 6201-030 to the complete 6811734000 marking, then compare the 6201-030 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-030 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-030; confirm steering position, climate-control specification and the original 6201-030 geometry before approval.
What circuit checks are useful when 6201-030 does not operate?
For 6201-030, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-030 motor again.
Which details should accompany a wholesale request for 6201-030?
Provide item 6201-030, OE 6811734000, the stated application, quantity and destination; add 6201-030 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-030?
Clear debris from the air inlet, check that the 6201-030 wheel turns freely, seat the 6201-030 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-030: Send 6811734000, the 6201-030 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.