AutoParts

6441N6 Blower Motor for CITROEN C5

Blower Motor — 6441N6. CITROEN C5. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
6441N6
Supplier SKU
6204-080
Vehicle application
CITROEN C5
Part type
Blower Motor
Send an inquiry

Key references

OE reference
6441N6
Supplier SKU
6204-080
Vehicle application
CITROEN C5
Part type
Blower Motor

Product specifications

OE reference6441N6
Supplier SKU6204-080
Vehicle applicationCITROEN C5
Vehicle makeCITROEN
Vehicle modelC5
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers698538 / E165009 / DEA07010 / CN8288

Product details

6441N6 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 6441N6 to support OE-number comparison before purchase.

For catalogue item 6204-080, Cabin 6441N6 airflow depends on the 6441N6 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6204-080 when comparing this 6441N6 airflow configuration.

OE Reference and Application

The primary catalogue number is 6441N6 . The recorded application is CITROEN C5. For 6204-080, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6204-080 with the approved OE reference.

HVAC Interface and 6441N6 installation

During work on 6204-080, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6204-080 before the lower trim is closed.

For item 6204-080, confirm that the 6441N6 centrifugal wheel clears its housing and that the 6204-080 connector lock engages without force. After seating 6204-080, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-080.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 6441N6

Cross-reference numbers: 698538 / E165009 / DEA07010 / CN8288

Vehicle brand: CITROEN

Vehicle model: C5

Model year: Confirm by OE reference

6441N6 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6204-080, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-080 record remains the picking reference.

For trade item 6204-080, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-080 on the packing instruction.

Frequently Asked Questions

How should item 6204-080 and blower number 6441N6 be verified?

Match 6204-080 to the complete 6441N6 marking, then compare the 6204-080 plug, terminal count, mounting flange and wheel dimensions with the removed CITROEN unit.

Can 6204-080 have more than one vehicle-side blower configuration?

Yes. CITROEN production changes can affect 6204-080; confirm steering position, climate-control specification and the original 6204-080 geometry before approval.

What circuit checks are useful when 6204-080 does not operate?

For 6204-080, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-080 motor again.

Which details should accompany a wholesale request for 6204-080?

Provide item 6204-080, OE 6441N6, the stated application, quantity and destination; add 6204-080 carton or private-label requirements separately.

How can noise be avoided after fitting 6204-080?

Clear debris from the air inlet, check that the 6204-080 wheel turns freely, seat the 6204-080 flange evenly and keep wiring away from the impeller.

Request a quote for 6204-080: Send 6441N6, the 6204-080 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.