AutoParts
6441EW Blower Motor for PEUGEOT 508
Blower Motor — 6441EW. PEUGEOT 508. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 6441EW
- Supplier SKU
- 6204-068
- Vehicle application
- PEUGEOT 508
- Part type
- Blower Motor
Key references
- OE reference
- 6441EW
- Supplier SKU
- 6204-068
- Vehicle application
- PEUGEOT 508
- Part type
- Blower Motor
Product specifications
| OE reference | 6441EW |
|---|---|
| Supplier SKU | 6204-068 |
| Vehicle application | PEUGEOT 508 |
| Vehicle make | PEUGEOT |
| Vehicle model | 508 |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | VAL515141 / 478842 / NN107860A / PE8421 |
Product details
6441EW Automotive Blower Motor Overview
The 6441EW record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6204-068, When the climate-control circuit commands 6441EW airflow, the electric motor rotates the 6441EW fan wheel inside the HVAC housing. Use 6204-068 when comparing this 6441EW airflow configuration.
OE Reference and Application
The primary catalogue number is 6441EW . The recorded application is PEUGEOT 508. For 6204-068, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6204-068 with the approved OE reference.
HVAC Interface and 6441EW installation
During work on 6204-068, If 6441EW airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 6441EW motor is the only cause. Recheck 6204-068 before the lower trim is closed.
For item 6204-068, confirm that the 6441EW centrifugal wheel clears its housing and that the 6204-068 connector lock engages without force. After seating 6204-068, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-068.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 6441EW
Cross-reference numbers: VAL515141 / 478842 / NN107860A / PE8421
Vehicle brand: PEUGEOT
Vehicle model: 508
Model year: Confirm by OE reference
6441EW installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6204-068, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-068 record remains the picking reference.
For trade item 6204-068, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-068 on the packing instruction.
Frequently Asked Questions
How should item 6204-068 and blower number 6441EW be verified?
Match 6204-068 to the complete 6441EW marking, then compare the 6204-068 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-068 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-068; confirm steering position, climate-control specification and the original 6204-068 geometry before approval.
What circuit checks are useful when 6204-068 does not operate?
For 6204-068, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-068 motor again.
Which details should accompany a wholesale request for 6204-068?
Provide item 6204-068, OE 6441EW, the stated application, quantity and destination; add 6204-068 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-068?
Clear debris from the air inlet, check that the 6204-068 wheel turns freely, seat the 6204-068 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-068: Send 6441EW, the 6204-068 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.