AutoParts

6441.K7 Blower Motor for CITROEN Xsara Picasso

Blower Motor — 6441.K7. CITROEN Xsara Picasso. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
6441.K7
Supplier SKU
6204-020
Vehicle application
CITROEN Xsara Picasso
Part type
Blower Motor
Send an inquiry

Key references

OE reference
6441.K7
Supplier SKU
6204-020
Vehicle application
CITROEN Xsara Picasso
Part type
Blower Motor

Product specifications

OE reference6441.K7
Supplier SKU6204-020
Vehicle applicationCITROEN Xsara Picasso
Vehicle makeCITROEN
Vehicle modelXsara Picasso
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbersKM3578 / 698575

Product details

6441.K7 Automotive Blower Motor Overview

AutoParts catalogues 6441.K7 as an HVAC 6441.K7 airflow component for workshops, distributors and export buyers.

For catalogue item 6204-020, When the climate-control circuit commands 6441.K7 airflow, the electric motor rotates the 6441.K7 fan wheel inside the HVAC housing. Use 6204-020 when comparing this 6441.K7 airflow configuration.

OE Reference and Application

The primary catalogue number is 6441.K7 . The recorded application is CITROEN Xsara Picasso. For 6204-020, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed CITROEN unit. Record 6204-020 with the approved OE reference.

HVAC Interface and 6441.K7 installation

During work on 6204-020, If 6441.K7 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 6441.K7 motor is the only cause. Recheck 6204-020 before the lower trim is closed.

For item 6204-020, confirm that the 6441.K7 centrifugal wheel clears its housing and that the 6204-020 connector lock engages without force. After seating 6204-020, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-020.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 6441.K7

Cross-reference numbers: KM3578 / 698575

Vehicle brand: CITROEN

Vehicle model: Xsara Picasso

Model year: Confirm by OE reference

6441.K7 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6204-020, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6204-020 record remains the picking reference.

For trade item 6204-020, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6204-020 on the packing instruction.

Frequently Asked Questions

How should item 6204-020 and blower number 6441.K7 be verified?

Match 6204-020 to the complete 6441.K7 marking, then compare the 6204-020 plug, terminal count, mounting flange and wheel dimensions with the removed CITROEN unit.

Can 6204-020 have more than one vehicle-side blower configuration?

Yes. CITROEN production changes can affect 6204-020; confirm steering position, climate-control specification and the original 6204-020 geometry before approval.

What circuit checks are useful when 6204-020 does not operate?

For 6204-020, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-020 motor again.

Which details should accompany a wholesale request for 6204-020?

Provide item 6204-020, OE 6441.K7, the stated application, quantity and destination; add 6204-020 carton or private-label requirements separately.

How can noise be avoided after fitting 6204-020?

Clear debris from the air inlet, check that the 6204-020 wheel turns freely, seat the 6204-020 flange evenly and keep wiring away from the impeller.

Request a quote for 6204-020: Send 6441.K7, the 6204-020 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.