6441.96 Blower Motor for CITROEN Saxo

6441.96 Automotive Blower Motor Overview

Reference 6441.96 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6204-013, the 6441.96 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6204-013 when comparing this 6441.96 airflow configuration.

OE Reference and Application

The primary catalogue number is 6441.96 . The recorded application is CITROEN Saxo. For 6204-013, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6204-013 with the approved OE reference.

HVAC Interface and 6441.96 installation

During work on 6204-013, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6204-013 before the lower trim is closed.

For item 6204-013, confirm that the 6441.96 centrifugal wheel clears its housing and that the 6204-013 connector lock engages without force. After seating 6204-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-013.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 6441.96

Cross-reference numbers: 698044 / 34099 / 730014N / CN8509

Vehicle brand: CITROEN

Vehicle model: Saxo

Model year: Confirm by OE reference

6441.96 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6204-013, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-013 record remains the picking reference.

For trade item 6204-013, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-013 on the packing instruction.

Frequently Asked Questions

How should item 6204-013 and blower number 6441.96 be verified?

Match 6204-013 to the complete 6441.96 marking, then compare the 6204-013 plug, terminal count, mounting flange and wheel dimensions with the removed CITROEN unit.

Can 6204-013 have more than one vehicle-side blower configuration?

Yes. CITROEN production changes can affect 6204-013; confirm steering position, climate-control specification and the original 6204-013 geometry before approval.

What circuit checks are useful when 6204-013 does not operate?

For 6204-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-013 motor again.

Which details should accompany a wholesale request for 6204-013?

Provide item 6204-013, OE 6441.96, the stated application, quantity and destination; add 6204-013 carton or private-label requirements separately.

How can noise be avoided after fitting 6204-013?

Clear debris from the air inlet, check that the 6204-013 wheel turns freely, seat the 6204-013 flange evenly and keep wiring away from the impeller.

Request a quote for 6204-013: Send 6441.96, the 6204-013 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country