64119242608 Blower Motor for BMW 750i 2009-2015

64119242608 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 64119242608 to support OE-number comparison before purchase.

For catalogue item 6230-004, Cabin 64119242608 airflow depends on the 64119242608 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6230-004 when comparing this 64119242608 airflow configuration.

OE Reference and Application

The primary catalogue number is 64119242608 . The recorded application is BMW 750i 2009-2015. For 6230-004, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6230-004 with the approved OE reference.

HVAC Interface and 64119242608 installation

During work on 6230-004, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6230-004 before the lower trim is closed.

For item 6230-004, confirm that the 64119242608 centrifugal wheel clears its housing and that the 6230-004 connector lock engages without force. After seating 6230-004, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6230-004.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 64119242608

Cross-reference numbers: 64119194590 / 64119200935 / 8EW351043261 / KM3756

Vehicle brand: BMW

Vehicle model: 750i

Model year: 2009-2015

64119242608 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6230-004, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6230-004 record remains the picking reference.

For trade item 6230-004, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6230-004 on the packing instruction.

Frequently Asked Questions

How should item 6230-004 and blower number 64119242608 be verified?

Match 6230-004 to the complete 64119242608 marking, then compare the 6230-004 plug, terminal count, mounting flange and wheel dimensions with the removed BMW unit.

Can 6230-004 have more than one vehicle-side blower configuration?

Yes. BMW production changes can affect 6230-004; confirm steering position, climate-control specification and the original 6230-004 geometry before approval.

What circuit checks are useful when 6230-004 does not operate?

For 6230-004, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6230-004 motor again.

Which details should accompany a wholesale request for 6230-004?

Provide item 6230-004, OE 64119242608, the stated application, quantity and destination; add 6230-004 carton or private-label requirements separately.

How can noise be avoided after fitting 6230-004?

Clear debris from the air inlet, check that the 6230-004 wheel turns freely, seat the 6230-004 flange evenly and keep wiring away from the impeller.

Request a quote for 6230-004: Send 64119242608, the 6230-004 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country