64119204154 Blower Motor for BMW 3 Series

64119204154 Automotive Blower Motor Overview

Reference 64119204154 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6230-038, the 64119204154 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6230-038 when comparing this 64119204154 airflow configuration.

OE Reference and Application

The primary catalogue number is 64119204154 . The recorded application is BMW 3 Series. For 6230-038, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6230-038 with the approved OE reference.

HVAC Interface and 64119204154 installation

During work on 6230-038, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6230-038 before the lower trim is closed.

For item 6230-038, confirm that the 64119204154 centrifugal wheel clears its housing and that the 6230-038 connector lock engages without force. After seating 6230-038, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6230-038.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 64119204154

Cross-reference numbers: 64118372797 / 641134537297 / 2311001 / 9159201 / 64116900685

Vehicle brand: BMW

Vehicle model: 3 Series

Model year: Confirm by OE reference

64119204154 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6230-038, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6230-038 record remains the picking reference.

For trade item 6230-038, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6230-038 on the packing instruction.

Frequently Asked Questions

How should item 6230-038 and blower number 64119204154 be verified?

Match 6230-038 to the complete 64119204154 marking, then compare the 6230-038 plug, terminal count, mounting flange and wheel dimensions with the removed BMW unit.

Can 6230-038 have more than one vehicle-side blower configuration?

Yes. BMW production changes can affect 6230-038; confirm steering position, climate-control specification and the original 6230-038 geometry before approval.

What circuit checks are useful when 6230-038 does not operate?

For 6230-038, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6230-038 motor again.

Which details should accompany a wholesale request for 6230-038?

Provide item 6230-038, OE 64119204154, the stated application, quantity and destination; add 6230-038 carton or private-label requirements separately.

How can noise be avoided after fitting 6230-038?

Clear debris from the air inlet, check that the 6230-038 wheel turns freely, seat the 6230-038 flange evenly and keep wiring away from the impeller.

Request a quote for 6230-038: Send 64119204154, the 6230-038 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country