64116927599 Blower Motor for BMW

64116927599 Automotive Blower Motor Overview

Reference 64116927599 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6230-042, the 64116927599 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6230-042 when comparing this 64116927599 airflow configuration.

OE Reference and Application

The primary catalogue number is 64116927599 . The recorded application is BMW. For 6230-042, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6230-042 with the approved OE reference.

HVAC Interface and 64116927599 installation

During work on 6230-042, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6230-042 before the lower trim is closed.

For item 6230-042, confirm that the 64116927599 centrifugal wheel clears its housing and that the 6230-042 connector lock engages without force. After seating 6230-042, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6230-042.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 64116927599

Cross-reference numbers: 6926239

Vehicle brand: BMW

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

64116927599 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6230-042, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6230-042 record remains the picking reference.

For trade item 6230-042, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6230-042 on the packing instruction.

Frequently Asked Questions

How should item 6230-042 and blower number 64116927599 be verified?

Match 6230-042 to the complete 64116927599 marking, then compare the 6230-042 plug, terminal count, mounting flange and wheel dimensions with the removed BMW unit.

Can 6230-042 have more than one vehicle-side blower configuration?

Yes. BMW production changes can affect 6230-042; confirm steering position, climate-control specification and the original 6230-042 geometry before approval.

What circuit checks are useful when 6230-042 does not operate?

For 6230-042, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6230-042 motor again.

Which details should accompany a wholesale request for 6230-042?

Provide item 6230-042, OE 64116927599, the stated application, quantity and destination; add 6230-042 carton or private-label requirements separately.

How can noise be avoided after fitting 6230-042?

Clear debris from the air inlet, check that the 6230-042 wheel turns freely, seat the 6230-042 flange evenly and keep wiring away from the impeller.

Request a quote for 6230-042: Send 64116927599, the 6230-042 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country