62310-4CL0A Front Grille for NISSAN X-Trail 2014 – base specification

62310-4CL0A Front Grille Product Overview

62310-4CL0A is listed as a front grille for NISSAN X-Trail 2014. This product page records the OE reference, vehicle application, supplied scope and practical fitment information needed for replacement-part sourcing.

Application and Product Function

On NISSAN X-Trail 2014, this front grille is intended to maintain the cooling-module entrance on the listed application, maintain the mesh opening on the listed application, and maintain the grille interface on the listed application. Its application-shaped frame can also organise the cooling-module entrance after grille damage, maintain the front-end proportions during collision repair, and restore the grille interface at the stated position.

Fitment Confirmation

Treat 62310-4CL0A as the primary identity for this part. For NISSAN X-Trail 2014, verify suitability by checking the source vehicle and then match the side orientation with vehicle build data, inspect the original sample on the target bumper, and verify the production date using product photographs. A physical comparison should additionally measure the regional package before purchase approval, verify the market trim against the removed grille, and compare the assembly scope before a quotation.

Installation and Handling

Before removing the original grille, protect the air guides through balanced pressure and align the camera mount before trim transfer. During trial fitting of NS02011-015, transfer the centre points during careful removal and align the painted edges without forcing plastic. Before the bumper is fully reassembled, transfer the latch access during careful removal and support the emblem bracket after the dry fit.

Product Technical Specifications

Product type: Front Grille

Primary OE reference: 62310-4CL0A

Cross-reference numbers: 62310-4CL0A 623104CL0A

Internal item code: NS02011-015

Vehicle brand: NISSAN

Vehicle model: X-Trail

Model year: 2014

Installation position: Front grille / radiator opening

Version / finish: base specification

Primary function: Application-specific exterior grille and front air-entry component

Quality Inspection and Protective Packing

Receiving inspection for 62310-4CL0A should include confirm the carton supports against the order line, protect the mounting holes with the carton open, and measure the centre line with the carton open. Before the part is fitted or repacked, the handler should also check the centre line after transport, confirm the edge straightness on both visible faces, and measure the clip seats under neutral lighting.

Wholesale Supply Information

To quote NS02011-015 accurately, the enquiry should provide the required quantity for export planning, request the internal item code with each order line, and separate the sample request before sample preparation. For samples, mixed-model cartons or repeat purchasing, please state the emblem requirement before carton approval, request the delivery schedule before pricing, and request the destination market before carton approval.

Frequently Asked Questions

Why are camera and emblem openings important for 62310-4CL0A?

Their size and position can vary by trim and market. Confirm the required openings so transferred equipment aligns correctly.

Are clips and fasteners supplied with 62310-4CL0A?

Reusable vehicle hardware is not automatically included. Check the photos and confirm clips, brackets and screws before finalising the order.

How should 62310-4CL0A be protected during shipping?

The visible face and unsupported corners should be isolated from rubbing and pressure, while the carton supports the frame without compressing the mesh.

How should fitment for 62310-4CL0A be confirmed?

Use the complete OE number, vehicle model and year, grille position, trim level and rear mounting pattern. A similar front view is not enough for approval.

What should be inspected when 62310-4CL0A arrives?

Check the label, outer frame, mesh, tabs, corners, visible finish and carton condition before discarding packaging or starting installation.

Product function: Front Grille serves as a non-structural exterior component ahead of the cooling module and matches a particular upper, lower or centre grille position.

Fitment check: Check whether the application requires a base, insert or complete grille assembly.

Supply scope: Use the image set to confirm whether the product is an insert, base or complete assembly.

Finish note: Confirm the finish specification before removing protective packing or starting installation.

Quotation information: State whether the request is for a sample, service stock or a bulk purchasing programme.