5F9Z19805DA Blower Motor for FORD Five Hundred

5F9Z19805DA Automotive Blower Motor Overview

This product entry documents the 5F9Z19805DA blower unit with practical identification and 5F9Z19805DA installation checkpoints.

For catalogue item 6203-088, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 5F9Z19805DA blower important at idle and in traffic. Use 6203-088 when comparing this 5F9Z19805DA airflow configuration.

OE Reference and Application

The primary catalogue number is 5F9Z19805DA . The recorded application is FORD Five Hundred. For 6203-088, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6203-088 with the approved OE reference.

HVAC Interface and 5F9Z19805DA installation

During work on 6203-088, After 5F9Z19805DA installation, operate low through high speed and confirm 5F9Z19805DA airflow reaches the selected vents without abnormal vibration. Recheck 6203-088 before the lower trim is closed.

For item 6203-088, confirm that the 5F9Z19805DA centrifugal wheel clears its housing and that the 6203-088 connector lock engages without force. After seating 6203-088, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-088.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 5F9Z19805DA

Cross-reference numbers: 15870966 / 2015223 / 22664694 / 2311667 / 3506175818

Vehicle brand: FORD

Vehicle model: Five Hundred

Model year: Confirm by OE reference

5F9Z19805DA installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-088, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-088 record remains the picking reference.

For trade item 6203-088, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-088 on the packing instruction.

Frequently Asked Questions

How should item 6203-088 and blower number 5F9Z19805DA be verified?

Match 6203-088 to the complete 5F9Z19805DA marking, then compare the 6203-088 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-088 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-088; confirm steering position, climate-control specification and the original 6203-088 geometry before approval.

What circuit checks are useful when 6203-088 does not operate?

For 6203-088, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-088 motor again.

Which details should accompany a wholesale request for 6203-088?

Provide item 6203-088, OE 5F9Z19805DA, the stated application, quantity and destination; add 6203-088 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-088?

Clear debris from the air inlet, check that the 6203-088 wheel turns freely, seat the 6203-088 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-088: Send 5F9Z19805DA, the 6203-088 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country