55036328 Blower Motor for JEEP

55036328 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 55036328 together with the 55036328 product images and vehicle data on this page.

For catalogue item 6217-082, the 55036328 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6217-082 when comparing this 55036328 airflow configuration.

OE Reference and Application

The primary catalogue number is 55036328 . The recorded application is JEEP. For 6217-082, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6217-082 with the approved OE reference.

HVAC Interface and 55036328 installation

During work on 6217-082, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6217-082 before the lower trim is closed.

For item 6217-082, confirm that the 55036328 centrifugal wheel clears its housing and that the 6217-082 connector lock engages without force. After seating 6217-082, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6217-082.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 55036328

Cross-reference numbers: 700126

Vehicle brand: JEEP

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

55036328 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6217-082, Packing preparation accounts for the 55036328 motor weight and wheel shape to reduce movement inside the carton. The 6217-082 record remains the picking reference.

For trade item 6217-082, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6217-082 on the packing instruction.

Frequently Asked Questions

How should item 6217-082 and blower number 55036328 be verified?

Match 6217-082 to the complete 55036328 marking, then compare the 6217-082 plug, terminal count, mounting flange and wheel dimensions with the removed JEEP unit.

Can 6217-082 have more than one vehicle-side blower configuration?

Yes. JEEP production changes can affect 6217-082; confirm steering position, climate-control specification and the original 6217-082 geometry before approval.

What circuit checks are useful when 6217-082 does not operate?

For 6217-082, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6217-082 motor again.

Which details should accompany a wholesale request for 6217-082?

Provide item 6217-082, OE 55036328, the stated application, quantity and destination; add 6217-082 carton or private-label requirements separately.

How can noise be avoided after fitting 6217-082?

Clear debris from the air inlet, check that the 6217-082 wheel turns freely, seat the 6217-082 flange evenly and keep wiring away from the impeller.

Request a quote for 6217-082: Send 55036328, the 6217-082 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country