53875-60160 Front Right Fender Liner for TOYOTA Prado FJ120 2010

53875-60160 Front Right Fender Liner Overview

This OE-based supply reference covers the front right position of 2010 TOYOTA Prado FJ120, after a torn, missing or deformed original liner requires replacement.

Wheel-Arch Protection and Panel Design

Compare the wheel-side surface and hidden body-side supports for 53875-60160 on 2010 TOYOTA Prado FJ120, because model revisions can move holes even when the overall curve looks similar.

Vehicle and OE Fitment Confirmation

Check the model generation and wheel-house position together for this front right liner, to reduce installation delays and avoidable returns.

Product Technical Specifications

Product type: Fender Liner

Primary OE reference: 53875-60160

Internal item code: TY02016-018

Vehicle brand: TOYOTA

Model: Prado FJ120

Position: Front Right wheel house

Applicable vehicle: 2010 TOYOTA Prado FJ120

Cross-reference numbers: 53875-60160

Installation and Receiving Guidance

Separate each OE line in mixed-model shipments when 53875-60160 arrives, before the old hardware is committed to the replacement.

Wholesale Ordering Information

Provide VIN details if the application sits near a model-year change for 53875-60160 and the front right 2010 TOYOTA Prado FJ120 application, to keep the quotation traceable to the correct product page.

Frequently Asked Questions

How can I confirm 53875-60160 fits my vehicle?

Match the bumper, undertray and mud-flap interfaces before ordering for 2010 TOYOTA Prado FJ120. before clips, sealers or underbody fasteners are disturbed.

Which wheel-house position uses 53875-60160?

53875-60160 is recorded for the front right position. Confirm the side and axle against the removed liner before ordering.

What should be checked when 53875-60160 is received?

Check the liner under neutral lighting for cracks or pressure marks. before the old hardware is committed to the replacement.

What is included with the 53875-60160 supply?

Order planning should treat the liner and any installation clips as separate requirements unless confirmed otherwise.

Which details are needed for a 53875-60160 quotation?

Provide clear photos of the original liner and wheel-house opening for TY02016-018. to prioritise workshop needs without confusing replenishment orders.

Protection function: This wheel-well shield belongs at the front right corner and follows a wheel-house liner application.

Fitment confirmation: For workshop sourcing, TY02016-018 records the 2010 TOYOTA Prado FJ120 fitment; retain the original liner for comparison. Compare every supplied photo with the retained component; so the physical interfaces support the stated application.

Mounting comparison: The component mounts around the front right wheel opening and joins neighbouring splash protection pieces. Confirm the liner follows the wheel opening without twisting; so the OE reference and the actual wheel-house part agree.

Supply scope: Supply is based on the shown wheel-house liner, while reusable fasteners normally remain vehicle-specific.

Receiving focus: Retain the carton until the component passes incoming inspection; before clips are inserted into the wrong holes.

Purchase preparation: List each left-right or front-rear requirement on a separate order line; to resolve revisions that a model name alone cannot show.