AutoParts

52498981 Blower Motor for CHEVROLET S10

Blower Motor — 52498981. CHEVROLET S10. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
52498981
Supplier SKU
6209-025
Vehicle application
CHEVROLET S10
Part type
Blower Motor
Send an inquiry

Key references

OE reference
52498981
Supplier SKU
6209-025
Vehicle application
CHEVROLET S10
Part type
Blower Motor

Product specifications

OE reference52498981
Supplier SKU6209-025
Vehicle applicationCHEVROLET S10
Vehicle makeCHEVROLET
Vehicle modelS10
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers52498981

Product details

52498981 Automotive Blower Motor Overview

Use 52498981 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.

For catalogue item 6209-025, Cabin 52498981 airflow depends on the 52498981 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6209-025 when comparing this 52498981 airflow configuration.

OE Reference and Application

The primary catalogue number is 52498981 . The recorded application is CHEVROLET S10. For 6209-025, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6209-025 with the approved OE reference.

HVAC Interface and 52498981 installation

During work on 6209-025, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6209-025 before the lower trim is closed.

For item 6209-025, confirm that the 52498981 centrifugal wheel clears its housing and that the 6209-025 connector lock engages without force. After seating 6209-025, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6209-025.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 52498981

Cross-reference numbers: 52498981

Vehicle brand: CHEVROLET

Vehicle model: S10

Model year: Confirm by OE reference

52498981 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6209-025, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6209-025 record remains the picking reference.

For trade item 6209-025, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6209-025 on the packing instruction.

Frequently Asked Questions

How should item 6209-025 and blower number 52498981 be verified?

Match 6209-025 to the complete 52498981 marking, then compare the 6209-025 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.

Can 6209-025 have more than one vehicle-side blower configuration?

Yes. CHEVROLET production changes can affect 6209-025; confirm steering position, climate-control specification and the original 6209-025 geometry before approval.

What circuit checks are useful when 6209-025 does not operate?

For 6209-025, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6209-025 motor again.

Which details should accompany a wholesale request for 6209-025?

Provide item 6209-025, OE 52498981, the stated application, quantity and destination; add 6209-025 carton or private-label requirements separately.

How can noise be avoided after fitting 6209-025?

Clear debris from the air inlet, check that the 6209-025 wheel turns freely, seat the 6209-025 flange evenly and keep wiring away from the impeller.

Request a quote for 6209-025: Send 52498981, the 6209-025 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.