52495490 Blower Motor for BUICK LeSabre

52495490 Automotive Blower Motor Overview

The 52495490 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6208-076, When the climate-control circuit commands 52495490 airflow, the electric motor rotates the 52495490 fan wheel inside the HVAC housing. Use 6208-076 when comparing this 52495490 airflow configuration.

OE Reference and Application

The primary catalogue number is 52495490 . The recorded application is BUICK LeSabre. For 6208-076, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6208-076 with the approved OE reference.

HVAC Interface and 52495490 installation

During work on 6208-076, If 52495490 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 52495490 motor is the only cause. Recheck 6208-076 before the lower trim is closed.

For item 6208-076, confirm that the 52495490 centrifugal wheel clears its housing and that the 6208-076 connector lock engages without force. After seating 6208-076, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-076.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 52495490

Cross-reference numbers: 52495490

Vehicle brand: BUICK

Vehicle model: LeSabre

Model year: Confirm by OE reference

52495490 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-076, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-076 record remains the picking reference.

For trade item 6208-076, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-076 on the packing instruction.

Frequently Asked Questions

How should item 6208-076 and blower number 52495490 be verified?

Match 6208-076 to the complete 52495490 marking, then compare the 6208-076 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-076 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-076; confirm steering position, climate-control specification and the original 6208-076 geometry before approval.

What circuit checks are useful when 6208-076 does not operate?

For 6208-076, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-076 motor again.

Which details should accompany a wholesale request for 6208-076?

Provide item 6208-076, OE 52495490, the stated application, quantity and destination; add 6208-076 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-076?

Clear debris from the air inlet, check that the 6208-076 wheel turns freely, seat the 6208-076 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-076: Send 52495490, the 6208-076 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country