5049767 Blower Motor for BUICK LeSabre

5049767 Automotive Blower Motor Overview

This product entry documents the 5049767 blower unit with practical identification and 5049767 installation checkpoints.

For catalogue item 6208-077, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 5049767 blower important at idle and in traffic. Use 6208-077 when comparing this 5049767 airflow configuration.

OE Reference and Application

The primary catalogue number is 5049767 . The recorded application is BUICK LeSabre. For 6208-077, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6208-077 with the approved OE reference.

HVAC Interface and 5049767 installation

During work on 6208-077, After 5049767 installation, operate low through high speed and confirm 5049767 airflow reaches the selected vents without abnormal vibration. Recheck 6208-077 before the lower trim is closed.

For item 6208-077, confirm that the 5049767 centrifugal wheel clears its housing and that the 6208-077 connector lock engages without force. After seating 6208-077, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-077.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 5049767

Cross-reference numbers: 52456175 / 52466053

Vehicle brand: BUICK

Vehicle model: LeSabre

Model year: Confirm by OE reference

5049767 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-077, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-077 record remains the picking reference.

For trade item 6208-077, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6208-077 on the packing instruction.

Frequently Asked Questions

How should item 6208-077 and blower number 5049767 be verified?

Match 6208-077 to the complete 5049767 marking, then compare the 6208-077 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-077 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-077; confirm steering position, climate-control specification and the original 6208-077 geometry before approval.

What circuit checks are useful when 6208-077 does not operate?

For 6208-077, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-077 motor again.

Which details should accompany a wholesale request for 6208-077?

Provide item 6208-077, OE 5049767, the stated application, quantity and destination; add 6208-077 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-077?

Clear debris from the air inlet, check that the 6208-077 wheel turns freely, seat the 6208-077 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-077: Send 5049767, the 6208-077 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country