4L0 953 041 Daytime Running Light for AUDI Q7 2010 Left

4L0 953 041 Daytime Running Light Product Overview

This page helps workshops and wholesale buyers distinguish the lamp from nearby left/right and trim variants. 4L0 953 041 is catalogued as a daytime running light for AUDI Q7 2010, installed at the left front bumper position.

4L0 953 041 — Product Function for the Listed Vehicle

The lamp assembly works with the vehicle harness, switch logic and surrounding bumper trim as one installation system. For 4L0 953 041 on the listed Q7, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU AD04002-033.

For SKU AD04002-033, separate standard, LED and multi-lens versions in the purchase list. Quoting 4L0 953 041 with the AUDI Q7 2010 and left position helps separate lighting-technology and model-year variants during packing.

AD04002-033 — Fitment Evidence to Compare

Start with the full reference 4L0 953 041; then check the connector key and terminal count. Item AD04002-033 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed daytime running light.

4L0 953 041 — Lighting Hardware Details

Use the 4L0 953 041 page photographs to compare projector or multi-lens features where fitted. For electrical compatibility on SKU AD04002-033, confirm that the connector seats fully without forcing the lock and confirm the plug reaches its locked position without modification.

AD04002-033 — Installation Sequence

Before securing 4L0 953 041, inspect damaged brackets before installing the replacement. After connecting SKU AD04002-033, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Daytime Running Light

Primary OE reference: 4L0 953 041

Cross-reference numbers: 4L0 953 041

Internal item code: AD04002-033

Vehicle brand: AUDI

Vehicle model: Q7

Model year: 2010

Installation position: Front bumper

Installation side: Left

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 4L0 953 041, protective wrapping limits abrasion on the lens while keeping the electrical connection dry and clean. For SKU AD04002-033, inner protection is arranged around the housing and connector so the optical surface does not carry the package load.

Frequently Asked Questions

Does 4L0 953 041 include a bulb or control module?

The supply scope for 4L0 953 041 follows the SKU AD04002-033 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

Is 4L0 953 041 interchangeable between left and right sides?

No interchangeability should be assumed. The left housing, reflector orientation and brackets must correspond to the original bumper position.

How do I confirm 4L0 953 041 for my vehicle?

Match 4L0 953 041, the left position, vehicle year, housing depth, mounting ears and electrical connector with the original AUDI lamp.

What if the original number for 4L0 953 041 is unreadable?

To compare SKU AD04002-033, send clear front, rear, connector and mounting-point photographs together with the AUDI model, year and installation side.

How is the 4L0 953 041 optical surface protected for shipping?

Packing for SKU AD04002-033 should isolate the lens from pressure and support projecting tabs, connector areas and adjustment hardware inside the carton.

Request a Product-Specific Quote

Send the complete OE reference 4L0 953 041, internal number AD04002-033, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.

Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.

Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.

Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.

Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.